View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

PDLF Series

Surface Mount Data Line EMI Filters

Our PDLF Series data line EMI filters eliminate conducted EMI in data line applications by providing common mode and differential mode noise attenuation. They reduce noise by a factor of 32 from 15 MHz to 300 MHz and have excellent environmental stability.

Eliminates the problem of conducted EMI in data line applications
Provide common mode and differential mode noise attenuation
Reduce noise by a factor of 32 from 15 MHz to 300 MHz
Excellent environmental stability and low cost
Available in 4-, 3- and 2-line versions
300 Vrms isolation

Consider our CDF series for 10- and 8-line applications

Need parts for space, military or other critical applications?
See Coilcraft ST515FRD Series

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$2.40
100	$1.99
250	$1.58
500	$1.38
1000	$1.08
2500	$0.92
5000	$0.85

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

L = Tin-silver-copper over tin over nickel over

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
D303	17 (4 of each)	$75.00

仕様

Electrical specifications at 25°C.

部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (MHz) 2	最小インダクタンス (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	絶縁電圧 (Vrms) 6
部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (MHz) 2	最小インダクタンス (µH) 3	Irms (mA) 4	DCR max (mΩ) 5	絶縁電圧 (Vrms) 6
PDLF4000L_	4	0.949 @ 210 MHz	1100	5.0	100	250	300
PDLF4500L_	4	0.848 @ 200 MHz	880	5.0	500	200	300
PDLF3000L_	3	0.901 @ 280 MHz	1400	5.0	100	250	300
PDLF3500L_	3	0.910 @ 210 MHz	1100	5.0	500	200	300
PDLF2000L_	2	0.958 @ 280 MHz	1300	5.0	100	250	300
PDLF2500L_	2	0.929 @ 250 MHz	1200	5.0	500	200	300

メモ

When ordering, please specify packaging code: e.g. PDLF2500LC.
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 130 kHz.
Irms: Current rating for each line.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

終端処理:

RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

パッケージ:

C = 7″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C

保管温度範囲:

Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Typical Impedance

Typical Response

回路図

PDLF4000/4500	PDLF3000/3500	PDLF2000/2500

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	2000*	178/330	60/100	13	22,4	16,4	16	8	4	2	4,4	0,35

* Special order

一般仕様

コア材料:

Ferrite

重量:

183 – 201 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PDLF Series

Surface Mount Data Line EMI Filters