サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1260T Series

High-temperature Common Mode Chokes

RoHS準拠 AEC-Q flag
Our MSD1260T Series high-temperature (AEC-Q200 Grade 1) common mode chokes provide both common-mode and differential-mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 170 MHz differential mode cutoff frequency
  • AEC-Q200 Grade 1 (−40°C to +125°C)
Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AE590PND Series | See Coilcraft ML590PND Series | See Coilcraft MS590PND Series
今すぐ購入:
個数 単価
1 $2.93
250 $1.91
500 $1.16
1000 $0.90
2500 $0.77
5000 $0.72

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 ライン コモンモード
ピークインピーダンス (kΩ)
遮断
周波数 (MHz) 2
最小
インダクタンス (µH) 3
Irms (A) 4 DCR max (Ω) 5 絶縁
電圧 (Vrms) 6
MSD1260T-332ML_ 2 5.29 @ 53.0 MHz 170 2.6 3.60 0.020 500
MSD1260T-472ML_ 2 6.27 @ 43.0 MHz 140 3.8 3.16 0.036 500
MSD1260T-562ML_ 2 8.38 @ 36.0 MHz 91.0 4.5 3.00 0.040 500
MSD1260T-682ML_ 2 9.78 @ 33.0 MHz 120 5.4 2.75 0.048 500
MSD1260T-822ML_ 2 9.72 @ 30.0 MHz 110 6.6 2.63 0.052 500
MSD1260T-103ML_ 2 12.31 @ 26.0 MHz 110 8.0 2.45 0.060 500
MSD1260T-123ML_ 2 14.67 @ 23.0 MHz 81.0 9.6 2.21 0.074 500
MSD1260T-153ML_ 2 16.17 @ 21.0 MHz 77.0 12 2.06 0.085 500
MSD1260T-183ML_ 2 16.96 @ 18.0 MHz 64.0 14 1.93 0.097 500
MSD1260T-223ML_ 2 20.73 @ 17.0 MHz 79.0 18 1.76 0.116 500
MSD1260T-273ML_ 2 26.07 @ 15.0 MHz 58.0 22 1.70 0.124 500
MSD1260T-333ML_ 2 26.15 @ 12.0 MHz 58.0 26 1.64 0.134 500
MSD1260T-393ML_ 2 30.30 @ 12.0 MHz 36.0 31 1.59 0.142 500
MSD1260T-473ML_ 2 29.81 @ 11.0 MHz 53.0 38 1.44 0.174 500
MSD1260T-563ML_ 2 51.88 @ 9.6 MHz 33.0 45 1.35 0.198 500
MSD1260T-683ML_ 2 55.74 @ 8.6 MHz 25.0 54 1.29 0.216 500
MSD1260T-823ML_ 2 70.75 @ 8.2 MHz 26.0 66 1.15 0.274 500
MSD1260T-104ML_ 2 80.40 @ 7.3 MHz 17.0 80 1.06 0.322 500
MSD1260T-124KL_ 2 87.96 @ 6.2 MHz 27.0 108 0.93 0.418 500
MSD1260T-154KL_ 2 97.64 @ 5.4 MHz 45.0 135 0.87 0.476 500
MSD1260T-184KL_ 2 124.30 @ 5.2 MHz 23.0 162 0.82 0.536 500
MSD1260T-224KL_ 2 143.40 @ 4.3 MHz 25.0 198 0.72 0.691 500
MSD1260T-274KL_ 2 134.80 @ 4.3 MHz 11.0 243 0.67 0.806 500
MSD1260T-334KL_ 2 132.10 @ 3.6 MHz 35.0 297 0.57 1.090 500
MSD1260T-394KL_ 2 131.00 @ 3.4 MHz 14.0 351 0.55 1.200 500
MSD1260T-474KL_ 2 193.50 @ 3.3 MHz 21.0 423 0.48 1.590 500
MSD1260T-564KL_ 2 175.20 @ 2.7 MHz 15.0 504 0.45 1.810 500
MSD1260T-684KL_ 2 158.60 @ 2.7 MHz 11.0 612 0.42 2.060 500
MSD1260T-824KL_ 2 225.90 @ 2.2 MHz 9.2 738 0.37 2.650 500
MSD1260T-105KL_ 2 197.00 @ 2.3 MHz 15.0 900 0.34 3.060 500
メモ
  1. When ordering, please specify termination and packaging codes: e.g. MSD1260T-105KLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

終端処理:

  • L = RoHS compliant matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +125°C with Irms current
保管温度範囲:
Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+165°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

回路図

schematic.png

物理的特徴

msd1260td_cm.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak.gif
500 330 100 13 30,4 24,4 24 16 4 2 6,9 0,5

一般仕様

コア材料:
Ferrite
重量:
2.8 – 3.2 g
パッケージ:
500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth
Winding to Winding Isolation:
500 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested with pure water or alcohol only. More info.

関連製品シリーズ