Datasheet 3D-Modelle

HP5 Series

Hexa-Path Magnetics

Six 1 : 1 isolated windings that can be connected in series or parallel
Tightly coupled windings
500 Vrms isolation between each winding
UL1446 Class F (155°C) Insulation System (UL File E83628)
Power range: 5 – 50 Watts as inductor and flyback transformer;
up to 150 Watts as forward transformer
Frequency range up to 1 MHz

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$9,96
100	$8,47
250	$4,37
500	$3,75
1000	$3,13
2500	$3,03
5000	$2,89

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

L = Tin-silver over tin over nickel

Packaging

D = 13" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2	Toleranz (%)	DCR max (mΩ) 3	Volt-Zeit- Produkt (V-µs) 4	Speicherenergie Spitze (µJ) 5	Isat (A) 6	Irms (A) 7
HP5-0053LD	3,4	5	45,0	62,8	946	4,7	2,3
HP5-0067LD	4,3	10	45,0	62,8	626	3,4	2,3
HP5-0083LD	5,3	15	45,0	62,8	562	2,9	2,3
HP5-0155LD	9,9	20	45,0	62,8	281	1,5	2,3
HP5-1200LD	77	25	45,0	62,8	Note 8	Note 8	2,3
HPH5-0053LD	7,6	5	70,0	94,2	809	2,9	2,0
HPH5-0067LD	9,7	10	70,0	94,2	700	2,4	2,0
HPH5-0083LD	12	15	70,0	94,2	546	1,9	2,0
HPH5-0155LD	22	20	70,0	94,2	248	0,94	2,0
HPH5-1200LD	173	25	70,0	94,2	Note 8	Note 8	2,0

Hinweise

When ordering, please specify packaging code: e.g. HPH1-1400LD
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is per winding, measured at 25°C on Cambridge Technology micro-ohmmeter or equivalent. For other operating temperatures,use this DCR at Temperature calculator.
Volt-time product is for a single winding or multiple windings connected in parallel. To calculate volt-time product for windings connected in series, multiply the value specified in the table by the number of windings connected.
Peak energy storage is for any combination of windings, assuming saturation current applied. See note 6 for definition of saturation current.
Isat: DC current at which the inductance drops 30% typ from its value without current, based on current applied to all six windings connected in series. For applications where all windings are not connected in series, use the following equation to calculate Isat: Isat = Isat(table) × 6 ÷ number of windings in series.
Irms: Current that causes a 40°C rise from 25°C ambient due to self heating, tested with continuous current flow through all windings connected in series. Application temperature rise will depend on the operating current, duty cycle, and winding connection.
Part is designed exclusively for use as a forward converter transformer and was not tested for energy storage and saturation current.

Anschlüsse:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

−40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: −40°C to +125°C
Packaging tape and reel or tray: −40°C to +80°C

Maximale Bauteiltemperatur:

+125°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

	Parts per reel		Reel dimensions (mm)						Tape dimensions (mm)						Orientation
	13" (330 mm)		A	B	C	D	E		W	P	Po	P1	H	T	Orientation
HP5 / HPH5	175		330	100	13	50.4	44.4		44	28	4	2	12.0	0.4

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

10.6 – 11.5 g

Verpackung:

175 per 13" reel

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

HP5 Series

Hexa-Path Magnetics

Technische Daten

Anschlüsse:

Verpackung:

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Allgemeine Spezifikation

Löten/Reinigen

Verwandte Produktreihen

HP1 Series

HP2 Series

HP3 Series

HP4 Series

HP6 Series

Lager

Spracheinstellungen

Währungseinstellungen

HP5 Series

Hexa-Path Magnetics

Gewählte Konfiguration nicht verfügbar

Technische Daten

Anschlüsse:

Verpackung:

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Allgemeine Spezifikation

Löten/Reinigen

Verwandte Produktreihen

HP1 Series

HP2 Series

HP3 Series

HP4 Series

HP6 Series

Warnung