Datasheet SPICE-Modell 3D-Modelle

A02T

Name: A02TGLC
Brand: Coilcraft
SKU: A02TGLC
Price: 0,88 USD
Availability: InStock

A02TJLC, A02TGLC

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Anzahl	Einzelpreis
1	$0,97
350	$0,79
700	$0,63
1400	$0,55
2100	$0,37
4000	$0,25
10000	$0,15

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

L = Tin-silver

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

G = 2%

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Designer-Kits:

Kit	Werte	Preis
C302	10 (12 of each)	$40,00
C302-2	10 (12 of each)	$60,00

Technische Daten

Electrical specifications at 25°C.

AxxT Series

Teilenummer 1	Windungen	Induktivität (nH) 2	Toleranz (%) 3	Q min @ 150 MHz 4	SRF min (GHz) 5	DCR max (mΩ) 6	Irms (A) 7
Teilenummer 1	Windungen	Induktivität (nH) 2	Toleranz (%) 3	Q min @ 150 MHz 4	SRF min (GHz) 5	DCR max (mΩ) 6	Irms (A) 7
A02T_L_	2	5,0	1,2,5	140	6,5	1,8	4,0

Hinweise

When ordering, please specify tolerance, termination and packaging codes: e.g. B10TJLC
Inductance measured at 150 MHz with an Agilent/HP 4286 or equivalent, a Coilcraft SMD-A and correlation pieces.
Tolerances in bold are stocked for immediate shipment.
Q measured at 150 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A test fixture or equivalent.
SRF tested on an Agilent/HP 8720D or equivalent and a Coilcraft SMD-D fixture.
DCR tested on the Cambridge Technology Model Micro-ohmmeter or equivalent. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 15°C temperature rise from 25°C ambient.

Toleranz:

F = 1%, G = 2%, J = 5%, K = 10% (Table above shows stock tolerances in bold.)

Anschlüsse:

L = RoHS compliant tin-silver (96.5/3.5) over copper.
T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape, 700 (AxxT) or 500 (BxxT) parts per full reel. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked, 2500 (AxxT) or 2200 (BxxT) parts per full reel.
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +125°C with Irms current, +125°C to +140°C with derated current

Lagertemperaturbereich:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+140°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

L vs Frequency

AxxT

Q vs Frequency

AxxT

L vs Frequency

BxxT

Q vs Frequency

BxxT

Physikalische Eigenschaften

Part number	Weight (mg)
A01T	31
A02T	42
A03T	52
A04T	65
A05T	78
B06T	100
B07T	110
B08T	118
B09T	133
B10T	147

Gurt/Rolle-Spezifikationen

Parts per reel			Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
Size A	700	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,3	0,32
Size B	500	2200*	178/330	60/100	13	12,4	16,4	16	8	4	2	3,4	0,28

* Special order

Allgemeine Spezifikation

Verpackung:

A0xT: 700/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth
BxxT: 500/7″ reel; 2200/13″ reel Plastic tape: 16 mm wide, 0.28 mm thick, 8 mm pocket spacing, 3.4 mm pocket depth

Temperature coefficient of inductance:

+5 to +70 ppm/°C

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Empfohlene Bestückungsaufnahme:

OD: 0.110 inch; ID: 0.091 inch

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

A02T

A02TJLC, A02TGLC