Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

XGL4018 Series

Ultra-Low Loss Shielded Power Inductors

RoHS-konform Halogenfrei AEC-Q flag
The revolutionary XGL4018 Series by Coilcraft is the epitome of cutting-edge power inductors. Unleash the potential of your DC-DC converters with unparalleled efficiency and performance. Engineered to perfection, these molded power inductors redefine industry standards with their astonishingly low DC and AC losses.

From frequencies spanning hundreds of kHz to an impressive 5+ MHz, experience an unrivaled level of precision. But that's not all! These marvels boast an extended range of inductance values, empowering you to customize your applications to perfection.

With the XGL4018 Series, Coilcraft has once again raised the bar, offering a unique blend of innovation, versatility, and exceptional quality that sets it apart from the rest. Upgrade to excellence today!
  • Industry's lowest DCR and ultra-low AC losses 
  • Superior current handling with soft saturation characteristics
  • Wide inductance range up to  4.7 µH
  • AEC-Q200 Grade 1 (-40°C to +125°C)
  • RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations

Jetzt kaufen:
Anzahl Einzelpreis
1 $1,98
100 $1,73
250 $1,30
500 $0,78
1000 $0,61
3000 $0,53
5000 $0,48

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:
Designer-Kits:
Kit Werte Preis
C508 13 (3 of each) $45,00
C509 49 (3 of each) $125,00

Technische Daten

Electrical specifications at 25°C. Operating voltage 0 - 80 V

Teilenummer 1 Induktivität (µH) 2
(Toleranz: ±20%)
DCR (mΩ) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
XGL4018-121MEC 0,12 1,6 2,0 255 9,9 17,4 24,5 19,5 27,2
XGL4018-221MEC 0,22 2,6 3,2 155 6,7 11,1 16,1 15,6 21,7
XGL4018-271MEC 0,27 3,3 4,0 135 6,6 10,5 14,7 13,0 18,4
XGL4018-361MEC 0,36 4,3 5,2 105 5,0 8,3 12,0 11,9 16,4
XGL4018-471MEC 0,47 5,1 6,1 95 4,9 8,1 11,4 11,0 15,2
XGL4018-561MEC 0,56 6,8 8,2 85 4,2 7,2 10,3 9,3 12,9
XGL4018-681MEC 0,68 7,4 8,9 75 4,1 6,7 9,4 8,8 12,4
XGL4018-821MEC 0,82 9,7 11,6 70 3,4 5,7 8,3 7,7 11,0
XGL4018-102MEC 1,0 10,7 12,9 60 3,4 5,6 7,8 7,3 10,4
XGL4018-152MEC 1,5 17,3 20,8 48 2,7 4,4 6,4 6,0 8,2
XGL4018-222MEC 2,2 25,9 31,1 38 2,3 3,6 5,0 5,0 6,8
XGL4018-332MEC 3,3 40,1 48,1 30 1,7 2,8 4,0 3,8 5,2
XGL4018-472MEC 4,7 57,8 69,4 25 1,5 2,4 3,4 3,3 4,5
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. XGL4018-472MEC
  2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperature use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 4395A or equivalent
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
    Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

Anschlüsse:

  • E = Halogen free component. RoHS compliant tin-silver over copper terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
−40°C to +125°C with (40°C rise) Irms
Lagertemperaturbereich:
Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Maximale Bauteiltemperatur:
+165°C (ambient + temp rise).
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Kennlinien

Physikalische Eigenschaften

xgl4018d.gif


 

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ac.gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 2,3 0,23
* Special order
 

Allgemeine Spezifikation

Kernmaterial:
Composite
Gewicht:
0.16 - 0.17 g
Verpackung:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen

Verwandte Produktfamilien