View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

3D Model Datasheet

ZE2706 Series

Low Profile Common Mode Choke

Miniature and low profile chip-style common mode choke; only 5.3 mm tall
High current and exceptional common mode noise attenuation
AEC-Q200 qualified

Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:

Anzahl	Einzelpreis
1	$3,42
100	$2,79
350	$2,09
700	$1,26
1000	$0,98

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

E = Tin over nickel over silver glass frit

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Gleichtakt- spitzenimpedanz (Ω)	Induktivität min (µH) 2	Streu- induktivitätmax (µH) 3	Irms (mA) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1	Gleichtakt- spitzenimpedanz (Ω)	Induktivität min (µH) 2	Streu- induktivitätmax (µH) 3	Irms (mA) 4	DCR max (Ω) 5	Isolations- spannung (Vrms) 6
ZE2706-AEC	950 @ 100 MHz	4,8	0,05	3,9	0,022	415

Hinweise

When ordering, please specify packaging code: e.g. ZE2706-AEC
Inductance is measured at 100 kHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent).
Leakage Inductance is measured at 100 kHz, 0.1 Vrms on an Agilent 4263B (or equivalent) with Sec shorted.
Current through the windings connected in series that causes a 40°C rise from 25°C. This information is for reference only and does not represent absolute maximum ratings.
DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent). For other operating temperatures, use this DCR at Temperature calculator.
415 Vrms, one minute isolation (hipot) measured between primary and secondary.

Anschlüsse:

RoHS compliant tin over nickel over silver glass frit.

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1500 parts per full reel). Factory order only, not stocked.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C with (15°C rise) Irms current.

Lagertemperaturbereich:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

140°C (ambient + temp rise).

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation vs Frequency (Common Mode)

Attenuation vs Frequency (Differential Mode)

Impedance vs Frequency (Common Mode)

Impedance vs Frequency (Differential Mode)

Pläne/Diagramme

Physikalische Eigenschaften

A max	B max	C max	D	E	F	G
0.284	0.191	0.209	0.012	0.059	0.040	0.197	inches
7,2	4,85	5,3	0,30	1,5	1,0	5,0	mm

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
350	1500*	178/330	60/100	13	22,4	16,4	16	8	4	2	5,5	0,40

*Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

0.53 – 0.54 mg

Verpackung:

350/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

Winding to Winding Isolation:

415 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZE2706 Series

Low Profile Common Mode Choke