Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD7342 Series

Common Mode Chokes

RoHS-konform AEC-Q flag
Our MSD7342 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 200 Vrms, one minute winding-to-winding isolation.
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 230 MHz differential mode cutoff frequency
  • 200 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,47
250 $1,18
500 $1,02
1000 $0,80
2500 $0,68
5000 $0,64

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
MSD7342-252ML_ 2 3,07 @ 59,0 MHz 89,0 2,0 2,17 0,033 200
MSD7342-332ML_ 2 3,86 @ 50,0 MHz 70,0 2,6 2,05 0,037 200
MSD7342-472ML_ 2 4,93 @ 37,0 MHz 55,0 3,8 1,74 0,051 200
MSD7342-562ML_ 2 5,96 @ 34,0 MHz 67,0 4,5 1,57 0,063 200
MSD7342-682ML_ 2 7,85 @ 31,0 MHz 79,0 5,4 1,49 0,070 200
MSD7342-822ML_ 2 9,09 @ 32,0 MHz 55,0 6,6 1,44 0,075 200
MSD7342-103ML_ 2 9,15 @ 24,0 MHz 63,0 8,0 1,24 0,100 200
MSD7342-123ML_ 2 11,85 @ 22,0 MHz 47,0 9,6 1,14 0,120 200
MSD7342-153ML_ 2 14,43 @ 20,0 MHz 53,0 12 1,09 0,130 200
MSD7342-183ML_ 2 18,24 @ 18,0 MHz 38,0 14 0,95 0,170 200
MSD7342-223ML_ 2 18,37 @ 15,0 MHz 49,0 18 0,84 0,220 200
MSD7342-273ML_ 2 25,63 @ 14,0 MHz 42,0 22 0,79 0,250 200
MSD7342-333ML_ 2 26,26 @ 14,0 MHz 41,0 26 0,76 0,270 200
MSD7342-393ML_ 2 35,44 @ 11,0 MHz 42,0 31 0,64 0,380 200
MSD7342-473ML_ 2 34,38 @ 11,0 MHz 38,0 38 0,61 0,420 200
MSD7342-563ML_ 2 41,03 @ 7,9 MHz 40,0 45 0,58 0,460 200
MSD7342-683ML_ 2 70,55 @ 8,5 MHz 52,0 54 0,51 0,600 200
MSD7342-823ML_ 2 84,57 @ 7,4 MHz 26,0 66 0,48 0,680 200
MSD7342-104ML_ 2 89,05 @ 6,6 MHz 24,0 80 0,45 0,770 200
MSD7342-124ML_ 2 101,40 @ 6,4 MHz 22,0 96 0,39 1,030 200
MSD7342-154ML_ 2 121,20 @ 5,2 MHz 19,0 120 0,34 1,350 200
MSD7342-184ML_ 2 141,50 @ 4,6 MHz 20,0 144 0,32 1,520 200
MSD7342-224ML_ 2 133,00 @ 4,8 MHz 25,0 176 0,30 1,720 200
MSD7342-274ML_ 2 103,70 @ 3,6 MHz 18,0 216 0,25 2,410 200
MSD7342-334ML_ 2 131,70 @ 3,8 MHz 9,1 264 0,24 2,700 200
MSD7342-394ML_ 2 145,90 @ 3,1 MHz 11,0 312 0,23 3,050 200
MSD7342-474ML_ 2 187,20 @ 2,7 MHz 11,0 376 0,20 4,000 200
MSD7342-564ML_ 2 204,40 @ 2,6 MHz 8,1 448 0,19 4,430 200
MSD7342-684ML_ 2 210,00 @ 2,4 MHz 3,3 544 0,18 5,000 200
MSD7342-824ML_ 2 251,80 @ 2,1 MHz 6,6 656 0,15 6,800 200
MSD7342-105ML_ 2 276,10 @ 2,1 MHz 5,1 800 0,14 7,800 200
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. MSD7342-105MLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

  • L = Matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape 250 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel)
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +85°C with (40°C rise) Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

schematic.png

Physikalische Eigenschaften

msd7342.png

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T

part_or_ak.gif

250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,9 0,4
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
0.76 – 0.87g
Winding to Winding Isolation:
200 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen

Verwandte Produktfamilien