Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1514 Series

Common Mode Chokes

RoHS-konform Halogenfrei
Our MSD1514 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 100 MHz differential mode cutoff frequency
  • 500 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $4,75
175 $3,80
700 $1,71
1400 $1,33
2800 $1,14
5000 $1,05

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
MSD1514-252ME_ 2 2,96 @ 35,0 MHz 100 2,5 5,10 0,012 500
MSD1514-472ME_ 2 4,02 @ 23,0 MHz 18,0 4,7 4,50 0,014 500
MSD1514-103ME_ 2 6,54 @ 14,0 MHz 17,0 10 4,00 0,018 500
MSD1514-123ME_ 2 7,83 @ 14,0 MHz 26,0 12 3,70 0,022 500
MSD1514-153ME_ 2 11,70 @ 11,0 MHz 9,3 15 3,40 0,028 500
MSD1514-223ME_ 2 17,10 @ 8,1 MHz 14,0 22 3,00 0,036 500
MSD1514-273ME_ 2 17,90 @ 7,2 MHz 10,0 27 2,95 0,039 500
MSD1514-333ME_ 2 22,60 @ 7,1 MHz 21,0 33 2,55 0,052 500
MSD1514-473ME_ 2 47,60 @ 6,4 MHz 5,3 47 2,20 0,075 500
MSD1514-683ME_ 2 37,80 @ 4,3 MHz 8,8 68 2,00 0,090 500
MSD1514-104KE_ 2 59,80 @ 3,7 MHz 11,0 100 1,65 0,126 500
MSD1514-224KE_ 2 85,60 @ 2,5 MHz 10,0 220 1,10 0,287 500
MSD1514-334KE_ 2 58,00 @ 2,0 MHz 7,3 330 0,98 0,367 500
MSD1514-474KE_ 2 101,90 @ 1,6 MHz 5,3 470 0,77 0,550 500
MSD1514-105KE_ 2 157,90 @ 1,1 MHz 4,9 1000 0,55 1,250 500
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. MSD1514-105KEC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

  • E = RoHS compliant matte tin over nickel over phos bronze.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • 13" reel, machine-ready
    EIA-481 embossed plastic tape (300 parts per full reel).
  • B = Less than full reel
    In tape, not machine ready. To have a leader and trailer added ($25 charge),
    use code letter D instead.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with (40°C rise) Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

Pläne/Diagramme

schematic.png

Physikalische Eigenschaften

msd1514d.png

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak.gif
175 330 100 13 38,4 32,4 32 24 4 2 14.3 0,5

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
9.0 – 11.8 g
Winding to Winding Isolation:
500 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested with pure water or alcohol only. More info.

Verwandte Produktreihen

Verwandte Produktfamilien