Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD5030V Series

High-isolation Common Mode Chokes

RoHS-konform Halogenfrei
Coilcraft LPD5030V Series provides both common mode and differential mode filtering in a single low-profile miniature device. It features 1500 Vdc (1000 Vrms) winding-to-winding isolation for higher voltage applications.
  • Miniaure, low-profile CM choke measures only 4.8 mm square and 2.9 mm high
  • 1500 Vdc (1000 Vrms) winding-to-winding isolation
  • Common mode and differential mode filtering in a single device
  • Up to 470 MHz differential mode cutoff frequency
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:

The part number you have selected is not available through our online store.

Please click the "Request Quote" button for pricing and more information.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
LPD5030V-472MR_ 2 7,85 @ 66,0 MHz 410 3,76 1,90 0,322 1000
LPD5030V-682MR_ 2 9,20 @ 56,0 MHz 470 5,44 1,55 0,395 1000
LPD5030V-103MR_ 2 11,69 @ 40,0 MHz 340 8,00 1,30 0,490 1000
LPD5030V-333MR_ 2 25,81 @ 19,0 MHz 240 26,40 0,67 0,895 1000
LPD5030V-154MR_ 2 102,70 @ 9,6 MHz 130 120,00 0,31 3,820 1000
LPD5030V-224MR_ 2 174,70 @ 7,5 MHz 83,0 176,00 0,24 5,250 1000
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. LPD5030V-224MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. 1000 Vrms, one minute isolation (hipot) between windings.

 

Anschlüsse:

  • R = Matte tin over nickel over silver.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (750 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with (40°C rise) Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

lpd5030s.gif

Physikalische Eigenschaften

lpd5030d.gif 

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
750 2500* 178/330 60/100 13 18,4 12,4 12 8 4 2 3,1 0,32
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
210 – 225 mg
Verpackung:
750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Winding to Winding Isolation:
1500 Vdc (1000 Vrms), one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Empfohlene Bestückungsaufnahme:
OD: 5 mm; ID: ≤ 2.5 mm
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktfamilien