站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

WB3010-1-SM

符合RoHS
We will continue to manufacture and support the WB series indefinitely. However, for new designs, consider the SWB, which is a drop-in replacement as an alternative to this series.

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $4.13
100 $3.30
250 $2.87
500 $2.50
1000 $1.94
2500 $1.66
5000 $1.52

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Surface mount

零件号 1 每个绕组的最小电感 (µH) 2 DCR max (Ω) Imp. ratio
pri:sec 3
额定电流 (mA) 带宽 (MHz) 原理图
Pri Sec Pri Sec
WB3010-1-SML_ 95 95 0.200 0.200 1 : 1 250 0.04 175 C
注释
  1. When ordering surface mount parts, please specify a packaging code: e.g. WB3040-SMLD
    Through-hole parts are packaged 70 per tube and do not require a packaging code when ordering.
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc
  3. Impedance ratio is for the full primary winding to the full secondary winding.

端子:

  • RoHS-compliant. Matte tin over nickel over phos bronze. Other terminations available at additional cost.

包装:

  • D = 13" machine ready reel.
    EIA-481 embossed plastic tape (500 parts per full reel).
  • B = Less than full reel.
    In tape, but not machine ready. To have a leader and trailer added ($25 charge),
    use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C
Packaging: –40°C to +80°C
最高元件温度:
+85°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332

性能曲线

Attenuation vs Current

Frequency Response

Frequency Response

Frequency Response

Frequency Response

原理图

WB10xx WB20xx WB30xx
wbts1.gif wbts2.gif wbts3.gif

物理特性

wbtd-(1).gif

dims_inches_mm.gif

卷装规格

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 (SMT parts)* 330 100 13 30,4 24,4 24 20 4 2 6,6 0,45
* Through-hole parts are packaged 70 per tube.

一般规格

核心材料:
Ferrite
重量:
0.37 – 0.39 g
包装:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.45 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品

相关产品系列