站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

WB2010-PC

WB2010-PCL

符合RoHS
We will continue to manufacture and support the WB series indefinitely. However, for new designs, consider the SWB, which is a drop-in replacement as an alternative to this series.

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $4.27
100 $3.87
250 $3.22
500 $2.58
1000 $2.06
2500 $1.66
5000 $1.33

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Through hole

零件号 1
(Hover for schematics)
每个绕组的最小电感 (µH) 2 DCR max (Ω) Imp. ratio
pri:sec 3
额定电流 (mA) 带宽 (MHz) 隔离
电压 (Vrms)
原理图
Pri Sec Pri Sec
WB2010-PCL 780 780 0.320 0.320 1 : 1 250 0.005 100 500 B
注释
  1. When ordering surface mount parts, please specify a packaging code: e.g. WB3040-SMLD
    Through-hole parts are packaged 70 per tube and do not require a packaging code when ordering.
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc
  3. Impedance ratio is for the full primary winding to the full secondary winding.

端子:

  • RoHS-compliant. Matte tin over nickel over phos bronze. Other terminations available at additional cost.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C
Packaging: –40°C to +80°C
最高元件温度:
+85°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Attenuation vs Current

Frequency Response

Frequency Response

Frequency Response

Frequency Response

原理图

A B C
wbts1.gif wbts2.gif wbts3.gif

物理特性

wbtd-(1).gif

dims_inches_mm.gif

卷装规格

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 (SMT parts)* 330 100 13 30,4 24,4 24 20 4 2 6,6 0,45
* Through-hole parts are packaged 70 per tube.

一般规格

核心材料:
Ferrite
重量:
0.37 – 0.39 g
包装:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.45 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品

相关产品系列