站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

4310LC-352

符合RoHS 无卤素

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $2.50
100 $2.35
350 $1.75
700 $1.15
1400 $0.82
2800 $0.70
5000 $0.64

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2
(公差: ±10%)
SRF typ (MHz) 3 DCR max (mΩ) 4 Irms (A) 5
20°C rise 40°C rise
4310LC-352KE_ 3.5 188 49.0 2.3 3.1
注释
  1. When ordering, please specify termination and packaging codes: e.g. 4310LC-132KEC
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 16193 fixture in Agilent/HP 4284A impedance analyzer or equivalent.
  3. ​SRF measured using Agilent/HP 8753D network analyzer or equivalent and a Coilcraft SMD-F test fixture.
  4. DCR measured at 25°C on a Keithley 580 micro-ohmmeter or equivalent. For other operating temperatures, use this DCR at Temperature calculator.
  5. Irms: Current that causes the specified temperature rise from 25°C ambient. Because of their open construction, these parts will not saturate. This information is for reference only and does not represent absolute maximum ratings.

端子:

  • E = RoHS compliant tin-silver over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (350 parts per full reel).
  • B = Less than full reel
    In tape but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • 13" reel, machine-ready
    EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +85°C with (40°C) Irms current
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+125°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):
Ferrite

性能曲线

Insertion Loss

Z vs Frequency

Insertion loss measured in a bias tee configuration with an Agilent/HP 8753ES network analyzer.

4310lcs.gif

物理特性

4310lcd.gif
dims_inches_mm.gif

卷装规格

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (300mm) A B C D E W P Po P1 H T part_or_j.gif
350 1500* 178/330 60/100 13 30,4 24,4 24 12 4 2 3.5 0,3
* Special order

一般规格

核心材料:
Ferrite
重量:
0.42 g
包装:
350/7″ reel,1500/13″ reel; Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.5 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品

相关产品系列