站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

SD54 Series

Surface Mount Power Inductors

符合RoHS
Coilcraft SD54 Series unshielded surface-mount power inductors are mechanically rugged and affordably priced. They offer high current ratings and low DC resistance for  greater efficiency.
  • Open magnetic path design
  • Cost-effective solution
  • Ferrite core construction
  • High saturation current ratings and low DCR

立即购买:
计数 单价
1 $1.17
400 $0.94
800 $0.56
1600 $0.44
3200 $0.39
4800 $0.35

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2 公差 (%) DCR (mΩ) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
SD54-103ML_ 10 20 - 78.6 28.0 2.0 2.3 2.4 1.7 2.3
SD54-123ML_ 12 20 80.2 88.2 26.0 1.8 2.0 2.2 1.6 2.2
SD54-153ML_ 15 20 94.0 103 23.0 1.5 1.8 1.9 1.5 2.1
SD54-183ML_ 18 20 103 113 21.0 1.4 1.6 1.8 1.4 2.0
SD54-223ML_ 22 20 119 130 19.0 1.3 1.5 1.6 1.3 1.8
SD54-273ML_ 27 20 134 147 18.0 1.2 1.4 1.4 1.2 1.7
SD54-333ML_ 33 20 150 165 16.0 1.1 1.2 1.3 1.2 1.6
SD54-393ML_ 39 20 195 214 13.0 1.0 1.1 1.2 1.0 1.4
SD54-473ML_ 47 20 222 244 12.0 0.92 1.0 1.1 0.97 1.3
SD54-563KL_ 56 10 251 276 11.0 0.83 0.96 1.0 0.92 1.3
SD54-683KL_ 68 10 335 368 9.3 0.76 0.88 0.95 0.80 1.1
SD54-823KL_ 82 10 379 416 8.4 0.69 0.80 0.85 0.74 1.1
SD54-104KL_ 100 10 503 553 7.4 0.62 0.72 0.77 0.64 0.88
SD54-124KL_ 120 10 579 636 7.0 0.56 0.66 0.71 0.58 0.80
SD54-154KL_ 150 10 654 719 6.3 0.51 0.60 0.64 0.57 0.77
SD54-184KL_ 180 10 874 961 5.5 0.46 0.53 0.57 0.49 0.67
SD54-224KL_ 220 10 996 1095 5.0 0.43 0.50 0.54 0.47 0.66
注释
  1. When ordering, please specify packaging code: e.g.SD54-224-KLC
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMD-D test fixture.
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

端子:

  • RoHS compliant tin-silver over tin over nickel over silver.

包装:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).
  • B = In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +85°C with (40°C rise) Irms
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+125°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Inductance vs. Current

Inductance vs. Frequency

物理特性

sd54d-(1).gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_q-(1).gif
400 1500* 178/330 60/100 13 18,4 12,4 12 8 4 2 4,7 0,4
* Special order
 

一般规格

核心材料:
Ferrite
重量:
0.35 – 0.43 g
包装:
400/7″ reel; 1500/13″ reel; Plastic tape: 12 mm wide, 0.4 mm thick, 8 mm pocket spacing, 4.7 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列

相关产品族