3D Model Datasheet

WA8721 Ultra-Low Loss

Shielded Power Inductors

Ultra low profile — only 1.2 mm high
Exceptionally low DCR and ultra low AC losses for high switching
Superior current handling with soft saturation characteristics
RoHS-compliant, halogen free. 260°C compatible. Tin-silver over copper terminations
AEC-Q200 Grade 1 (−40°C to +125°C)
COTS Plus tin-silver-copper and tin-lead terminations available

立即购买:

索取样品:

规格

Electrical specifications at 25°C.

零件号 1	电感 (nH) 2 (公差: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
零件号 1	电感 (nH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
WA8721-AE_	60	4.1	4.8	485	8.0	13.8	19.3	12.8	17.2

注释

When ordering, please specify termination and packaging codes: e.g. WA8721-AEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

端子:

E = RoHS compliant tin-silver over copper terminations.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with (40°C rise) Irms current

储存温度范围:

Component: −55°C to +165°C
Tape and reel packaging: −55°C to +80°C

最高元件温度:

+165°C (Ambient + temperature rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	1,80	0,23

一般规格

核心材料:

Composite

包装:

1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.8 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

WA8721 Ultra-Low Loss

Shielded Power Inductors

规格

端子:

包装:

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

XEL3515 Series

XEL3520 Series

XEL3530 Series

XEL4012, 4014 Series

XEL4012V, 4014V High Voltage

XEL4020 Series

XEL4020V Series Ultra-Low Loss

XEL4030 Series

XEL4030V Series Ultra-Low Loss

XEL5020 Series

XEL5030 Series

XEL5050 Series

XEL6030 Series

XEL6060 Series

相关产品族

LPS

XGL

XAL

XFL

RFC,RFB

MSS/MOS

仓库

语言设定

货币设定

WA8721 Ultra-Low Loss

Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

XEL3515 Series

XEL3520 Series

XEL3530 Series

XEL4012, 4014 Series

XEL4012V, 4014V High Voltage

XEL4020 Series

XEL4020V Series Ultra-Low Loss

XEL4030 Series

XEL4030V Series Ultra-Low Loss

XEL5020 Series

XEL5030 Series

XEL5050 Series

XEL6030 Series

XEL6060 Series

相关产品族

LPS

XGL

XAL

XFL

RFC,RFB

MSS/MOS

警告