View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

0805USBN Series

Low-profile Common Mode Chokes

Our 0805USBN Series low-profile common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also suitable for USB-type C specification 1.0 and provide up to
6.5 GHz differential mode 3 dB cutoff frequency and up to 30 dB common mode noise attenuation in the GHz range.

For noise suppression in super-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). Also suitable for USB-type C specification 1.0.
Up to 6.5 GHz differential mode 3 dB cutoff frequency
Up to 35 dB common mode noise attenuation in GHz range
Compact, low-profile (<1.0 mm) package
Designed for high temperature applications up to +125°C

Refer to Designing Common Mode Filters for design guidance.

立即购买:

零件号

查找我的元件

计数	单价
1	$0.82
200	$0.68
500	$0.47
1000	$0.38
2000	$0.31
4000	$0.29

对于大批量采购或非库存产品，点击这里请求报价。

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

设计套件:

套件	电感值	价格
C470	39 (10 of each)	$110.00

规格

Electrical specifications at 25°C.

零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (GHz) 2	共模典型衰减 (dB)			最小电感 (nH) 3	Irms (mA) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (GHz) 2	10 MHz	100 MHz	500 MHz	最小电感 (nH) 3	Irms (mA) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
0805USBN-121MR_	2	0.14 @ 2.6 GHz	6.4	0.04	0.50	5.00	14	500	0.110	250
0805USBN-271MR_	2	0.30 @ 2.5 GHz	5.1	0.09	1.40	10.00	30	500	0.140	250
0805USBN-481MR_	2	0.60 @ 3.0 GHz	3.4	0.13	3.50	14.70	53	500	0.220	250
0805USBN-701MR_	2	0.79 @ 2.0 GHz	3.4	0.18	5.30	17.40	77	500	0.235	250
0805USBN-941MR_	2	1.28 @ 1.4 GHz	3.5	0.30	7.60	21.10	105	500	0.270	250
0805USBN-132MR_	2	1.61 @ 1.2 GHz	2.3	0.50	10.00	24.40	140	500	0.320	250
0805USBN-162MR_	2	2.00 @ 1.0 GHz	1.5	0.78	12.10	27.30	182	450	0.370	250
0805USBN-222MR_	2	2.47 @ 0.96 GHz	1.7	1.14	14.00	30.00	252	350	0.630	250

注释

When ordering, please specify packaging code: e.g. 0805USBN-222MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

端子:

Matte tin over nickel over silver-palladium-glass frit.

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with Irms current

储存温度范围:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

140°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,07	0,23

*Special order

一般规格

核心材料:

Ferrite

重量:

9.0 – 13.0 mg

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0805USBN Series

Low-profile Common Mode Chokes

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

0603USB Series

0805USBF Series

ZE2401 Series

仓库

语言设定

货币设定

0805USBN Series

Low-profile Common Mode Chokes

所选配置不可用

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

0603USB Series

0805USBF Series

ZE2401 Series

警告