站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0603USB Series

Common Mode Choke

符合RoHS 无卤素
Our 0603USB Series common mode chokes eliminate virtually all common mode noise in USB 3.1 Gen 1, HDMI, IEEE 1394 and LVDS applications and support data rates up to 4.8 Gbit/s.

 

  • Eliminates virtually all common mode noise
  • Optimized for USB 3.1 Gen 1, HDMI, IEEE 1394 and LVDS applications
  • Supports data rates up to 4.8 Gbit/s.
  • Up to 3.7 GHz differential mode 3 dB cutoff frequency
  • Up to 0.7 kOhms common mode peak impedance and 20 dB common mode noise attenuation

Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AR312FRA Series | See Coilcraft CP312FRA Series
立即购买:
计数 单价
1 $0.74
200 $0.60
500 $0.37
1000 $0.29
2000 $0.25
4000 $0.23

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:
设计套件:
套件 电感值 价格
C470 39 (10 of each) $110.00

规格

Electrical specifications at 25°C.

零件号 1 线组数 共模
峰值阻抗 (kΩ)
截止
频率 (GHz) 2
共模
典型衰减 (dB)
最小
电感 (nH) 3
Irms (mA) 4 DCR max (Ω) 5 隔离
电压 (Vrms) 6
10 MHz 500 MHz 1 GHz
0603USB-251ML_ 2 0.10 @ 3.0 GHz 3.8 1.31 3.16 8.45 18 500 0.077 250
0603USB-601ML_ 2 0.18 @ 3.0 GHz 3.4 3.00 6.88 13.27 37 500 0.109 250
0603USB-951ML_ 2 0.30 @ 2.6 GHz 2.8 4.62 9.75 16.06 63 500 0.142 250
0603USB-142ML_ 2 0.42 @ 1.9 GHz 1.9 6.85 12.80 18.16 98 500 0.174 250
0603USB-222ML_ 2 0.66 @ 1.8 GHz 0.96 9.14 16.53 20.29 150 500 0.209 250
注释
  1. When ordering, please specify packaging code: e.g. 0603USB-222MLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
  4. Irms: Current per winding that causes a 20°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. 250 Vrms, 1 minute interwinding isolation (hipot).

端子:

  • Gold over nickel over silver-palladium-glass frit.

包装:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
–40°C to +85°C with Irms current, +85°C to +105°C with derated current
储存温度范围:
Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+105°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs frequency

原理图

0805usbs.gif

物理特性

0603usbd.gif

dims_inches_mm.gif
These parts are noi marked.

卷装规格

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 1,14 0,23
*Special order

一般规格

核心材料:
Ferrite
重量:
4.9 – 5.2 mg

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列