サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1583 Series

Common Mode Chokes

RoHS準拠 ハロゲンフリー
Our MSD1583 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.
  • Common- and differential-mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 44 MHz differential mode cutoff frequency
  • 500 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
今すぐ購入:
個数 単価
1 $3.72
300 $2.44
600 $1.47
1200 $1.14
2400 $0.98
4800 $0.90

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 ライン コモンモード
ピークインピーダンス (kΩ)
遮断
周波数 (MHz) 2
最小
インダクタンス (µH) 3
Irms (A) 4 DCR max (Ω) 5 絶縁
電圧 (Vrms) 6
MSD1583-103ME_ 2 10.86 @ 17.0 MHz 38.0 8.0 3.68 0.031 500
MSD1583-123ME_ 2 12.11 @ 16.0 MHz 30.0 9.6 3.54 0.037 500
MSD1583-153ME_ 2 12.31 @ 14.0 MHz 25.0 12 3.18 0.045 500
MSD1583-183ME_ 2 15.77 @ 13.0 MHz 25.0 14 3.04 0.048 500
MSD1583-223ME_ 2 14.47 @ 12.0 MHz 28.0 18 2.44 0.065 500
MSD1583-333ME_ 2 33.82 @ 9.0 MHz 28.0 26 2.16 0.095 500
MSD1583-473ME_ 2 39.79 @ 7.6 MHz 23.0 38 1.98 0.115 500
MSD1583-683ME_ 2 49.24 @ 5.9 MHz 17.0 54 1.56 0.165 500
MSD1583-104KE_ 2 69.83 @ 5.0 MHz 16.0 90 1.24 0.260 500
MSD1583-154KE_ 2 73.09 @ 3.9 MHz 12.0 135 1.06 0.380 500
MSD1583-224KE_ 2 78.91 @ 3.3 MHz 9.7 198 0.92 0.460 500
MSD1583-474KE_ 2 104.90 @ 2.2 MHz 7.4 423 0.65 1.040 500
MSD1583-105KE_ 2 129.00 @ 1.5 MHz 5.8 900 0.42 2.400 500
メモ
  1. When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

終端処理:

  • E = RoHS compliant matte tin over nickel over phos bronze.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +85°C with Irms current
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+125°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

回路図

schematic.png

物理的特徴

msd1583.png

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak.gif
300 330 100 13 38,4 32,4 32 24 4 2 8,6 0,5

一般仕様

コア材料:
Ferrite
重量:
3.7 – 4.4 g
Winding to Winding Isolation:
500 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー