サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD3015 Series

Low-profile Common Mode Chokes

RoHS準拠 ハロゲンフリー
Coilcraft LPD3015 Series common mode chokes provide both common mode and differential mode filtering in a single low-profile miniature device.  
  • Low-profile miniature CM choke measures just 3 × 3 × 1.4 mm
  • Common mode and differential mode filtering in a single device
  • Up to 530 MHz differential mode cutoff frequency
  • 100 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
今すぐ購入:
個数 単価
1 $2.92
250 $2.17
500 $1.43
1000 $1.04

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 ライン コモンモード
ピークインピーダンス (kΩ)
遮断
周波数 (MHz) 2
最小
インダクタンス (µH) 3
Irms (A) 4 DCR max (Ω) 5 絶縁
電圧 (Vrms) 6
LPD3015-391MR_ 2 1.03 @ 330 MHz 540 0.31 1.45 0.071 100
LPD3015-561MR_ 2 1.44 @ 240 MHz 540 0.45 1.37 0.079 100
LPD3015-102MR_ 2 2.43 @ 160 MHz 330 0.80 1.08 0.129 100
LPD3015-152MR_ 2 3.56 @ 130 MHz 330 1.2 0.86 0.204 100
LPD3015-182MR_ 2 4.37 @ 110 MHz 280 1.4 0.78 0.273 100
LPD3015-222MR_ 2 4.67 @ 100 MHz 330 1.8 0.75 0.300 100
LPD3015-332MR_ 2 7.28 @ 81.0 MHz 220 2.6 0.67 0.337 100
LPD3015-472MR_ 2 10.7 @ 66.0 MHz 210 3.8 0.54 0.503 100
LPD3015-682MR_ 2 12.1 @ 54.0 MHz 290 5.4 0.49 0.622 100
LPD3015-103MR_ 2 17.8 @ 47.0 MHz 330 8.0 0.38 1.040 100
LPD3015-153MR_ 2 22.6 @ 33.0 MHz 140 12 0.32 1.420 100
LPD3015-183MR_ 2 29.0 @ 31.0 MHz 94.0 14 0.31 1.550 100
LPD3015-223MR_ 2 27.3 @ 24.0 MHz 88.0 18 0.28 1.890 100
LPD3015-333MR_ 2 41.1 @ 21.0 MHz 59.0 26 0.23 2.840 100
LPD3015-473MR_ 2 48.7 @ 18.0 MHz 50.0 38 0.19 4.030 100
LPD3015-683MR_ 2 64.5 @ 14.0 MHz 48.0 54 0.16 6.110 100
LPD3015-104MR_ 2 94.7 @ 13.0 MHz 47.0 80 0.13 8.540 100
LPD3015-124MR_ 2 116 @ 11.0 MHz 37.0 96 0.13 9.230 100
LPD3015-154MR_ 2 135 @ 9.3 MHz 27.0 120 0.11 12.400 100
LPD3015-184MR_ 2 170 @ 8.0 MHz 39.0 144 0.10 15.320 100
LPD3015-224MR_ 2 155 @ 7.1 MHz 27.0 176 0.09 18.560 100
LPD3015-334MR_ 2 222 @ 5.9 MHz 16.0 264 0.07 27.700 100
メモ
  1. When ordering, please specify termination and packaging codes: e.g. LPD3015-334MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

終端処理:

  • R = Matte tin over nickel over silver
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

パッケージ:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape 1000 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +85°C with (40°C rise) Irms current
保管温度範囲:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+125°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲線

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

回路図

LPD_CM_Choke_Schematic.gif

物理的特徴

lpd3015d.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,65 0,26
* Special order

一般仕様

コア材料:
Ferrite
重量:
45 – 52 mg
パッケージ:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Winding to Winding Isolation:
100 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
推奨ピック&プレースノズル:
OD: 3 mm; ID: ≤ 1.5 mm
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー