Datasheet 3D Model SPICE SPICEモデル

SLZ4040 Series

High Current Ferrite Beads

Wirewound surface mount package
High current ferrite beads designed for high frequency EMI noise cancellation
Optimized for CISPR 25 EMC compliance, 30 MHz to 3 GHz
AEC-Q200 Qualified

今すぐ購入:

部品番号

部品を検索

サンプルを依頼:

部品番号

部品を検索

仕様

Electrical specifications at 25°C.

部品番号 1	インピーダンスタイプ (Ω)		インダクタンス (nH) 2 (公差: ±20%)	DCR (公差: ±10%) (mΩ) 3	Isat (A) 4	Irms (A) 5
部品番号 1	100 MHz	1 GHz	インダクタンス (nH) 2 (公差: ±20%)	DCR (公差: ±10%) (mΩ) 3	Isat (A) 4	at 20°C Rise	at 40°C Rise
SLZ4040-180MEC	18	78	30	0.32	46	32	44
SLZ4040-350MEC	35	74	80	0.32	16	32	44

メモ

When ordering, please specify packaging code: SLZ4040-350MEC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is measured on a micro-ohmmeter at points indicated in the diagram below.
DC current that causes an inductance drop of 20% (typ) from its value without current.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions. Temperature derating curves.

終端処理:

RoHS compliant matte tin over nickel over copper

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Factory order only, not stocked.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +105°C with (40°C rise) Irms current.

保管温度範囲:

Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

145°C (ambient + temp rise).

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Current vs Temperature

Impedance vs Frequency

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	2000*	178/330	60/100	13	18,4	12,4	12	8	4	2	4,0	0,35

* Special order

一般仕様

コア材料:

Ferrite

重量:

0.24 – 0.26 g

パッケージ:

500/7″ reel; 2000/13″ reel; Plastic tape: 12 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.0 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLZ4040 Series

High Current Ferrite Beads