Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

4513TC Series

High Performance RFID Transponder Coils

RoHS-konform AEC-Q flag
Our 4513TC Series of RFID transponder coils was designed for high performance with higher sensitivity and greater read distances than other coils of this size.
  • For RFID applications at 125 kHz
  • Developed for harsh mechanical environments
  • Plastic base provides exceptional durability
  • Higher sensitivity and greater read distances than other coils this size
  • AEC-Q200 Grade 1 (−40°C to +125°C)
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,06
500 $0,92
1000 $0,80
2500 $0,69
5000 $0,60

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Induktivität (mH)
at 125 kHz 2
(Toleranz: ±2%)
Q min Leseentfernung
(inch/cm) 3
Empfindlichkeit
(mV/µT) 4
Abgleich-
Kondensator (pF) 5
DCR max (Ω) 6 SRF typ (MHz) 7
4513TC-404XGL_ 0,40 29 23,9 / 60,71 11,76 4050 9,7 5,9
4513TC-105XGL_ 1,00 33 30,95 / 78,61 19,8 1621 20,6 3,7
4513TC-245XGL_ 2,38 40 36,75 / 93,35 32,8 681 39,0 2,2
4513TC-495XGL_ 4,90 44 38,55 / 97,92 54,76 331 55,8 1,6
4513TC-725XGL_ 7,20 51 44,1 / 112,01 76,97 225 91,0 1,4
Hinweise
  1. When ordering, please specify packaging code: 4513TC-725XGLD
  2. Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended test procedures, contact Coilcraft.
  3. Read distance measured using the KEELOQ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the voltage across the resonant circuit dropped below 10 mV.
  4. Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.”
  5. Matching capacitor value required for parallel resonant circuit operating at 125 kHz.
  6. DCR measured on micro-ohmmeter
  7. SRF measured using Agilent/HP 8753D network analyzer.

Anschlüsse:

  • RoHS compliant gold over nickel over phos bronze.

Verpackung:

  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape (2500 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
     
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +125°C
Lagertemperaturbereich:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
One per billion hours / one billion hours, calculated per Telcordia SR-332

Kennlinien

L vs Frequency

Physikalische Eigenschaften

4513tcd.gif


dims_inches_mm-(3).gif

Gurt/Rolle-Spezifikationen

tapereel_pl-(30).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_i-(5).gif
2500 330 100 13 30,4 24,4 24 8 4 2 2,75 0,35

Allgemeine Spezifikation

Kernmaterial:
280 – 335 mg
Gewicht:
–40°C to +125°C
Verpackung:
2500 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 8 mm pocket spacing, 2.75 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested with pure water or alcohol only. More info

Verwandte Produktreihen