3D Model Datasheet SPICE-Modell SPICE S-Param

1008HS (2520)

Ceramic Chip Inductors

This legacy series is no longer recommended for new designs, however, we will continue to support the 1008HS series indefinitely. Consider the 1008CT or 1008HT series for new designs.

Consider the 1008CT or 1008HT series for new designs.

Inductance values from 10 nH to 1000 nH (tolerances as low as 1%)
High Q compared to non-wirewound inductors, especially at high frequencies
Ceramic construction for high self resonance

Need parts for space, military or other critical applications?
See Coilcraft ST413RAE Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$0,92
200	$0,75
500	$0,56
1000	$0,39
2000	$0,26
4000	$0,21
10000	$0,17

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

. Auf Lager, noch heute versandbereit.

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (µH) 2	Toleranz (%) 3	Q min 4	SRF min (MHz) 5	DCR max (Ω) 6	Irms (mA) 7
Teilenummer 1	Induktivität (µH) 2	Toleranz (%) 3	Q min 4	SRF min (MHz) 5	DCR max (Ω) 6	Irms (mA) 7
1008HS-100T_R_	0,010 @ 50,0 MHz	5	50 @ 500 MHz	4100	0,080	1000
1008HS-120T_R_	0,012 @ 50,0 MHz	5	50 @ 500 MHz	3300	0,090	1000
1008HS-150T_R_	0,015 @ 50,0 MHz	5	50 @ 500 MHz	2500	0,10	1000
1008HS-180T_R_	0,018 @ 50,0 MHz	5	50 @ 350 MHz	2500	0,11	1000
1008HS-220T_R_	0,022 @ 50,0 MHz	5	55 @ 350 MHz	2400	0,12	1000
1008HS-270T_R_	0,027 @ 50,0 MHz	2,5	55 @ 350 MHz	1600	0,13	1000
1008HS-330T_R_	0,033 @ 50,0 MHz	2,5	60 @ 350 MHz	1600	0,14	1000
1008HS-390T_R_	0,039 @ 50,0 MHz	2,5	60 @ 350 MHz	1500	0,15	1000
1008HS-470T_R_	0,047 @ 50,0 MHz	1,2,5	65 @ 350 MHz	1500	0,16	1000
1008HS-560T_R_	0,056 @ 50,0 MHz	1,2,5	65 @ 350 MHz	1300	0,18	1000
1008HS-680T_R_	0,068 @ 50,0 MHz	1,2,5	65 @ 350 MHz	1300	0,20	1000
1008HS-820T_R_	0,082 @ 50,0 MHz	1,2,5	60 @ 350 MHz	1000	0,22	1000
1008HS-101T_R_	0,10 @ 25,0 MHz	1,2,5	60 @ 350 MHz	1000	0,56	650
1008HS-121T_R_	0,12 @ 25,0 MHz	1,2,5	60 @ 350 MHz	950	0,63	650
1008HS-151T_R_	0,15 @ 25,0 MHz	1,2,5	45 @ 100 MHz	850	0,70	580
1008HS-181T_R_	0,18 @ 25,0 MHz	1,2,5	45 @ 100 MHz	750	0,77	620
1008HS-221T_R_	0,22 @ 25,0 MHz	1,2,5	45 @ 100 MHz	700	0,84	500
1008HS-271T_R_	0,27 @ 25,0 MHz	1,2,5	45 @ 100 MHz	600	0,91	500
1008HS-331T_R_	0,33 @ 25,0 MHz	1,2,5	45 @ 100 MHz	570	1,1	450
1008HS-391T_R_	0,39 @ 25,0 MHz	1,2,5	45 @ 100 MHz	500	1,1	470
1008HS-471T_R_	0,47 @ 25,0 MHz	1,2,5	45 @ 100 MHz	450	1,2	470
1008HS-561T_R_	0,56 @ 25,0 MHz	1,2,5	45 @ 100 MHz	415	1,3	400
1008HS-621T_R_	0,62 @ 25,0 MHz	1,2,5	45 @ 100 MHz	375	1,4	300
1008HS-681T_R_	0,68 @ 25,0 MHz	1,2,5	45 @ 100 MHz	375	1,5	400
1008HS-751T_R_	0,75 @ 25,0 MHz	1,2,5	45 @ 100 MHz	360	1,5	360
1008HS-821T_R_	0,82 @ 25,0 MHz	1,2,5	45 @ 100 MHz	350	1,6	400
1008HS-911T_R_	0,91 @ 25,0 MHz	1,2,5	35 @ 50,0 MHz	320	1,7	380
1008HS-102T_R_	1,0 @ 25,0 MHz	2,5	35 @ 50,0 MHz	290	1,8	370

Hinweise

When ordering, please specify tolerance, termination and packaging codes: e.g. 1008HS-102TGRC
Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
Tolerances in bold are stocked for immediate shipment.
Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

Toleranz:

F = 1%, G = 2%, J = 5% (Table above shows stock tolerances in bold.)

Anschlüsse:

R = RoHS compliant matte tin over nickel over silver platinum-glass frit.
L = RoHS compliant silver-palladium-platinum-glass frit.
T = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
S = non-RoHS tin-lead (63/37) (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +125°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+140°C (ambient + temp rise).

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

L vs Frequency

Q vs Frequency

Physikalische Eigenschaften

A max	B max	C max	E	F	G	H	I	J
0.105	0.095	0.070	0.080	0.020	0.060	0.100	0.040	0.050	inches
2,67	2,41	1,78	2,03	0,51	1,52	2,54	1,02	1,27	mm

Note: Height dimension is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,8	0,23

*Special order

Allgemeine Spezifikation

Kernmaterial:

Ceramic

Gewicht:

28.3– 31.5 mg

Verpackung:

2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth

Temperature coefficient of inductance:

+25 to +125 ppm/°C

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

1008HS (2520)

Ceramic Chip Inductors