Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO6610 Series

Low Profile Surface Mount Power Inductors

RoHS-konform AEC-Q flag
Coilcraft LPO6610 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • Low profile for compact packaging
  • High saturation current ratings
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve
  • AEC-Q200 Grade 3 (−40°C to +85°C)
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,37
250 $1,03
500 $0,78
1000 $0,65
5000 $0,53

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:
Designer-Kits:
Kit Werte Preis
C367 16 (3 of each) $50,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Induktivität (µH) 2
(Toleranz: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (A) 4 Irms (A) 5
LPO6610-122ML_ 1,2 0,080 190 2,1 1,7
LPO6610-152ML_ 1,5 0,10 140 1,9 1,5
LPO6610-222ML_ 2,2 0,12 115 1,6 1,4
LPO6610-332ML_ 3,3 0,16 90,0 1,3 1,2
LPO6610-472ML_ 4,7 0,20 88,0 1,1 1,1
LPO6610-682ML_ 6,8 0,32 66,0 0,90 0,85
LPO6610-103ML_ 10 0,41 55,0 0,80 0,75
LPO6610-153ML_ 15 0,55 42,0 0,65 0,60
LPO6610-223ML_ 22 0,85 38,0 0,50 0,52
LPO6610-333ML_ 33 1,3 29,0 0,40 0,42
LPO6610-473ML_ 47 1,8 22,0 0,35 0,36
LPO6610-683ML_ 68 2,5 18,0 0,30 0,30
LPO6610-104ML_ 100 3,5 14,0 0,25 0,26
LPO6610-154ML_ 150 5,0 12,0 0,18 0,21
LPO6610-224ML_ 220 7,0 10,0 0,16 0,18
LPO6610-334ML_ 330 15,0 8,0 0,13 0,13
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. LPO6610-334MLC
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves

Anschlüsse:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (1000 per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +85°C with Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Inductance vs. Frequency

Inductance vs. Current

Physikalische Eigenschaften

lpo6610d-(1).gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation 
7" (178 mm) A B C D E W P Po P1 H T part_or_aa.gif
1000 178 60 13 18,4 12,4 12 8 4 2 1,2 0,3
‡ Part marking does not indicate polarity

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
91.0 - 95.0 mg
Verpackung:
1000/7″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.2 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen

Verwandte Produktfamilien