3D Model Datasheet SPICE-Modell

XAL1350-222

Name: XAL1350-222NED
Brand: Coilcraft
SKU: XAL1350-222NED
Price: 3,02 USD
Availability: InStock

XAL1350-222MED, XAL1350-222NED

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Anzahl	Einzelpreis
1	$6,24
400	$5,01
800	$3,02
1200	$2,35
2400	$2,01
5000	$1,85

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

D = 13" machine-ready reel

Tolerance

N = 30%

M = 20%

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Technische Daten

Electrical specifications at 25°C. Operating voltage 0 — 60 V

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	typ	max	SRF typ (MHz) 4	Isat (A) 5	20°C rise	40°C rise
XAL1350-222_E_	2,2	4,2	4,8	23,0	46,0	19,0	24,0

Hinweise

When ordering, please specify tolerance and packaging codes: e.g. XAL1350-302NED
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

Toleranz:

N = 30%
M = 20%
(Table above shows stock tolerances)

Anschlüsse:

RoHS compliant tin-silver over copper. Other terminations available at additional cost.

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

−40°C to +125°C with (40°C rise) Irms

Lagertemperaturbereich:

Component: −55°C to +165°C
Tape and reel packaging: −55°C to +80°C

Maximale Bauteiltemperatur:

+165°C (Ambient + temperature rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs Frequency

Inductance vs Current

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
400	330	100	13	32,4	24,4	24	20	4	2	5,2	0,3

Allgemeine Spezifikation

Kernmaterial:

Composite

Gewicht:

4.5 – 4.9 g

Verpackung:

400/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 20 mm pocket spacing, 5.2 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XAL1350-222

XAL1350-222MED, XAL1350-222NED