Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors


LPD5030V-103MRB, LPD5030V-103MRC

RoHS-konform Halogenfrei
This is a new version recommended for new designs. Only the termination material and part number have changed. The previous version is available only to current customers.

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,63
375 $1,30
750 $1,13
1500 $0,89
3000 $0,76
6000 $0,69

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:
Kit Werte Preis
C463 41 (3 of each) $160,00
C481 19 (3 of each) $70,00

Technische Daten

Electrical specifications at 25°C.

Für Flyback-Anwendungen

Teilenummer 1
(Hover for schematics)
Induktivität (µH) 2
(Toleranz: ±20%)
DCR max (Ω) 3 Isolations-
spannung (V) 4
induktivität (nH) 6
LPD5030V-103MR_ 10 0,490 1000 130 1 : 1

Für SEPIC-Anwendungen

Teilenummer 1
(Hover for schematics)
Induktivität (µH) 2
(Toleranz: ±20%)
DCR max (Ω) 3 SRF typ (MHz) 5 Kopplungskoeffizient Streu-
induktivität (nH) 6
Isat (A) 7 Irms (A)
10% drop 20% drop 30% drop beide Wicklungen 8 eine Wicklung 9
LPD5030V-103MR_ 10 0,490 37,1 0.97 130 1,1 1,2 1,3 0,54 0,76
  1. When ordering, please specify packaging code: e.g. LPD5030V-333MEC
  2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. 
    For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value
  3. DCR is for each winding. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
    For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
  4. 1000 Vrms, one minute isolation (hipot) between windings. Designed to provide Functional Insulation only; does not protect against electrical shock; nor intended for the isolation of SELV circuits from Hazardous Voltage circuits.
  5. SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
  6. Leakage inductance is for L1 and is measured with L2 shorted.
  7. DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
  8. Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
  9. Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.


  • RoHS compliant matte tin over nickel over silver


  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).
RoHS-konform , Halogenfrei
−40°C to +85°C with Irms current.
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (Ambient + temperature rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332


Inductance vs Current

Inductance vs Frequency




Physikalische Eigenschaften


                1  :  1




Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
750 2500* 178/330 60/100 13 18,4 12,4 12 8 4 2 3,1 0,32
* Special order

Allgemeine Spezifikation

210 – 225 mg
750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth.


Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Empfohlene Bestückungsaufnahme:
OD: 5 mm; ID: ≤ 2.5 mm
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produkte