Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0805USB Series

Common Mode Choke

RoHS-konform Halogenfrei
Our 0805USB Series was designed for common mode noise suppression in high-speed differential signal lines (USB2.0, IEEE1394, and LVDS) and provide up to 3.4 GHz differential mode 3 dB cutoff frequency. They provide up to 2 kOhms common mode peak impedance and more than 30 dB common mode noise attenuation.
  • For common mode noise suppression in high speed differential signal lines: USB2.0, IEEE1394, LVDS, etc.
  • For USB 3.x applications, consider our 0603USB0805USBF or 0805USBN series
  • Up to 3.4 GHz differential mode 3 dB cutoff frequency
  • Up to 2 kOhms common mode peak impedance and more than 30 dB common mode noise attenuation

Need parts for space, military or other critical applications? 
 - See Coilcraft CPS 336FRA series

Refer to Designing Common Mode Filters for design guidance.

Jetzt kaufen:
Anzahl Einzelpreis
1 $0,90
200 $0,69
500 $0,49
1000 $0,38
2000 $0,34
4000 $0,31

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:
Designer-Kits:
Kit Werte Preis
C470 39 (10 of each) $110,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (GHz) 2
Gleichtakt-
dämpfungsart (dB)
Induktivität
min (nH) 3
Irms (mA) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
10 MHz 100 MHz 500 MHz
0805USB-421ML_ 2 0,22 @ 3,0 GHz 3,5 1,1 2,3 8,4 23 500 0,12 250
0805USB-901ML_ 2 0,29 @ 3,0 GHz 2,5 1,4 4,2 16,9 47 500 0,17 250
0805USB-172ML_ 2 0,64 @ 1,8 GHz 1,8 2,3 6,7 22,0 84 500 0,25 250
0805USB-262ML_ 2 0,82 @ 1,8 GHz 1,5 3,0 8,6 27,8 147 500 0,26 250
0805USB-372ML_ 2 1,06 @ 1,4 GHz 0,82 4,5 11,9 34,3 189 500 0,32 250
0805USB-502ML_ 2 1,42 @ 1,1 GHz 0,70 4,9 14,5 31,3 273 500 0,37 250
0805USB-672ML_ 2 1,75 @ 0,93 GHz 0,46 8,4 16,6 30,0 322 500 0,45 250
0805USB-902ML_ 2 2,06 @ 0,81 GHz 0,47 8,7 18,7 30,5 413 500 0,65 250
Hinweise
  1. When ordering, please specify packaging code: e.g. 0805USB-902MLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
  4. Irms: Current per winding that causes a 20°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. 250 Vrms, 1 minute interwinding isolation (hipot).

Anschlüsse:

  • Gold over nickel over silver-palladium-glass frit.

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (2000 per full reel).
  • B = Less than full reel
    In tape, not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with Irms current
Lagertemperaturbereich:
Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
105°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

0805usbs.gif

Physikalische Eigenschaften

0805usbd.gif

dims_inches_mm.gif
 

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 1,5 0,23
*Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
14.9 – 15.2 mg

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen