3D Model Datasheet

1210CAN Series

Common Mode Choke

Our 1210CAN Series filters a broad frequency range of common mode noise with 50% lower DCR and higher current handling than other CANbus chokes in the market. They are designed for common mode noise suppression on CAN or CAN FD lines in automotive or general industrial automation applications, and can also be used for FlexRay automotive bus systems.

Designed for common mode noise suppression on CAN or CAN FD in automotive or general industrial automation applications
51μH value meets IEC 6228-3 (CDV Annex D) requirements
Can be used for FlexRay automotive bus system
Filters a broad frequency range of common mode noise
Low profile 1210 footprint: 3.30 × 2.67 × 3.0 mm
AEC-Q200 Grade 1 (−40°C to +125°C)

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$1,20
100	$1,10
250	$0,99
500	$0,89
1000	$0,78
2500	$0,68
5000	$0,58

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

N = 30%

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Leitungen	Induktivität (µH) 2 (Toleranz: ±30%)	Irms (mA) 3	DCR max (Ω) 4	Isolations- spannung (Vrms) 5
Teilenummer 1	Leitungen	Induktivität (µH) 2 (Toleranz: ±30%)	Irms (mA) 3	DCR max (Ω) 4	Isolations- spannung (Vrms) 5
1210CAN-113NR_	2	11	300	0,45	250
1210CAN-223NR_	2	22	300	0,60	250
1210CAN-513NR_	2	51	200	1,35	250
1210CAN-104NR_	2	100	100	3,70	250

Hinweise

When ordering, please specify packaging code: e.g. 1210CAN-104NRC
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/ HP 4263B LCR meter and a Coilcraft CCF 1190 fixture.
Equal current when applied to each winding simultaneously that causes a 25°C temperature rise from 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding, measured 25°C on a Keithley 580 micro-ohmmeter and a Coilcraft CCF 858 fixture. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

Anschlüsse:

RoHS compliant matte tin over nickel over silver palladium-glass frit.

Verpackung:

C = 7" machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+150°C

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Attenuation

Impedance vs Frequency

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	3000*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,72	0,25

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

100 – 120 mg

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1210CAN Series

Common Mode Choke