站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

WB2.5-6SL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $2.61
250 $2.17
500 $1.80
1000 $1.51
2500 $1.27
5000 $1.05

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

No taps

零件号 1 每个绕组的最小电感 (µH) 2 DCR max (mΩ) 3 Imp. ratio
pri:sec 4
额定电流 (mA) 插入
损耗 (db)
带宽 (MHz) 原理图
Pri Sec Pri Sec
WB2.5-6SL_ 30 75 100 130 1 : 2.5 250 0.26 0.08 225 A
注释
  1. When ordering, please specify a packaging code: e.g. WB25-1SLD
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4192 or equivalent.
  3. DCR measured on a micro-ohmmeter at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Impedance ratio is for the full primary winding to the full secondary winding.
  5. DC imbalance is the difference in current measured at pins 1 and 3 with the source at pin 2. Inductance drop is 15% at maximum imbalance.

端子:

  • RoHS-compliant. 260°C compatible. Matte tin over nickel over phos bronze terminations.
  • COTS Plus tin-silver-copper and tin-lead terminations available.

包装:

  • D = 13" machine ready reel.
    EIA-481 embossed plastic tape (500 parts per full reel).
  • B = Less than full reel.
    In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C
Tape and reel or tube packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332

性能曲线

Frequency Response

原理图

A (No Tap) B (Sec Tap) C (Pri and Sec Tap)
wb_schema.gif wb_schemb.gif wb_schemc.gif

物理特性

wb_smtd.gif
dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 330 100 13 30,4 24,4 24 20 4 2 6,6 0,42

一般规格

核心材料:
Ferrite
重量:
0.38 – 0.40 g
包装:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.42 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info

相关产品

相关产品系列