站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

FCT1-50D3SL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $4.12
175 $3.30
700 $2.87
1400 $2.23
2800 $1.91
5000 $1.75

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1 功率 (W) 输入电压 (V) 最小
电感 (µH) 2
DCR max (mΩ) 3 最大
漏电感
(µH) 4
匝数比 5 频率 (kHz) 隔离
电压 (Vrms) 6
次级
输出 (V, A)
Pri Sec Sync Bias Pri : Sec : Sync : Bias
FCT1-50D3SL_ 30 36 72 72.9 27.5 10.0 160.0 250.0 0.420 1 : 0.44 : 0.56 : 1 250 1500 5 V , 6 A
注释
  1. When ordering, please specify packaging code: e.g. FCT1-240D3SLD
  2. Inductance is measured at 250 kHz, 0.2 Vrms, 0 Adc.
  3. DCR for the primary and secondary is with the windings connected in parallel.
  4. Leakage inductance is for the primary windings with the secondary windings shorted.
  5. Turns ratio is with the primary windings and the secondary windings connected in parallel.
  6. 1500 Vrms winding to winding isolation.

端子:

  • L = RoHS tin-silver over tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (175 parts per full reel)
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

原理图

fct1xxd3slschematic.gif

The primary windings and the secondary windings are to be
connected in parallel on the PC board.
Transformer Recommended
output inductor
FCT1-33D3SL SER2013-472
FCT1-50D3SL SER1360-103
FCT1-120D3SL MSS1278-563
FCT1-195D3SL MSS1278-154
FCT1-240D3SL MSS1278-224

These inductors are recommended for 30% ripple current. Ripple less than 30% may require the use of physically larger inductors. Allowing higher ripple current to make use of smaller inductors may create a risk of discontinuous output current.

物理特性

fct1xxd3sldimensions.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T FCT1-xxD3SLorientation.gif
175 330 100 13 50,4 44,4 44 32 4 2 12,0 0,4

一般规格

核心材料:
Ferrite
重量:
10.1 – 10.7 g
包装:
175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 12.0 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

相关产品