站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

B0392-AL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $11.21
1000 $8.95
5000 $7.03

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments UCC3580一起使用

输出 功率 Fsw
3.3 V , 30 A 100 W 300 kHz

规格

Electrical specifications at 25°C.

Planar Transformer

零件号 1 最小
电感 (µH) 2
DCR max (mΩ) 3 最大
漏电感
(µH) 4
匝数比 隔离
电压 (Vrms)
Pri Sec Pri : Sec
B0392-AL_ 65 13.5 0.4 0.22 1 : 0.167 1500
注释
  1. When ordering, please specify packaging code: e.g. B0392-ALD
  2. Inductance measured on an Agilent/HP 4284 between pins 1 and 3 at 250 kHz, 0.1 Vrms, 0 Adc.
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Leakage inductance measured between pins 1 and 3 at 100 kHz, 0.1 Vrms, 0 Adc with secondary pins shorted.

端子:

  • RoHS-compliant. 260°C compatible. Matte tin over nickel over brass terminations.

包装:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (200 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +85°C
储存温度范围:
Component: −40°C to +85°C
Tape and reel packaging: −40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲线

Inductance vs Current (B0434-A Output Inductor)

Inductance vs Frequency (B0434-A Output Inductor)

原理图

         B0392-AL                                      B0434-AL
Planar Transformer                      Planar Output Inductor              
ucc3580s-(1).gif
 

物理特性


ucc3580td-(2).gif

dims_inches_mm-(3).gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_v.gif
200 330 100 13 50,4 44,4 44 32 4 2 9,4 0,37

一般规格

核心材料:
Ferrite
重量:
11.1 g
包装:
200 per 13″ reel Plastic tape: 44 mm wide, 0.37 mm thick, 32 mm pocket spacing, 9.4 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品