Datasheet 3D Model

SMT Gate Drive Transformer

for ON Semi NCP1652 & NCP4302

Designed for ON Semiconductor Power Factor Correction and Flyback Controllers
Requires only 1.5 sq cm of board space
Operating frequency from 20 kHz to 250 kHz

立即购买:

计数	单价
1	$2.45
250	$2.17
500	$1.91
1000	$1.47
2500	$1.28
5000	$1.17

对于大批量采购或非库存产品，点击这里请求报价。

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

典型应用

与ON Semiconductor NCP4302, NCP1652一起使用

Fsw
250 kHz

规格

Electrical specifications at 25°C.

零件号 1 (Hover for schematics)	0A时的电感 (mH) 2 (公差: ±20%)	DCR max 3		最大漏电感 (µH) 4	匝数比	电容 max (pF)	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms) 6
零件号 1 (Hover for schematics)	0A时的电感 (mH) 2 (公差: ±20%)	Pri (Ω)	Sec (Ω)	最大漏电感 (µH) 4	Pri : Sec	电容 max (pF)	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms) 6
DA2099-ALD	3.79	2.30	2.85	13	1 : 1	13	221	1500

注释

When ordering, please specify packaging code: e.g. DA2099-ALD
Inductance measured at 100 kHz, 0.3 Vrms, 0 Adc
DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance measured at 100 kHz, 0.3 Vrms with secondary pins shorted.
Based on Bsat of the core at 25°C and number of turns of the primary.
1500 Vrms isolation from primary to secondary.

端子:

RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (500 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	/330	100	13	30,4	24,4	24	20	4	2	6,13	0,36

一般规格

核心材料:

Ferrite

重量:

1.35 g

包装:

500/13″ reel; Plastic tape: 24 mm wide, 0.36 mm thick, 20 mm pocket spacing, 6.13 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested with pure water or alcohol only. More info.

仓库

语言设定

货币设定