站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

YA9219 Surface Mount

Wideband RF Transformer

符合RoHS AEC-Q flag
The YA9219-AL Wideband Transformer with an integrated common-mode choke combines high-speed signal transmission, isolation, and effective common-mode noise filtering in a single compact component. This integrated design helps simplify PCB layout, save valuable board space, and ensure compliance with EMI/EMC requirements, while maintaining the high performance required for 10GBASE-T1 Ethernet applications.
  • Cost effective surface mount wideband transformer
  • 300 V one minute isolation (hipot) from primary to secondary
  • AEC-Q200 qualified

立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
每个绕组的最小电感 (µH) 1 DCR max (mΩ) 2 带宽 (MHz) 隔离
电压 (Vrms) 3
匝数比
Pri Sec Pri Sec
YA9219-ALD 127 65 350 150 - - 300 1 : 0.714
注释
  1. Inductance tested at 10 kHz, 0.1 Vrms, 0 Adc.
     
  2. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  3. 300 Vrms, one minute isolation (hipot) from primary to secondary.
     
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
 

端子:

Terminations RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

 
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Attenuation vs Frequency (Scc21)

Insertion Loss (Sdd21)

Return Loss (Sdd11)

原理图


Connect pin 6 and pin 4 on PC board.

物理特性



dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_w.gif
  1000 330 100 13 22,4 16,4 16 12 4 2 5,0 0,35

​​​

一般规格

核心材料:
Ferrite
重量:
250 – 270 mg
包装:
1000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm  pocket spacing, 5.0 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
 
焊接之前,请参阅焊接线艺元件
PCB清洗:
PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCBt_Washing.pdf.

相关产品系列