站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

164-03A06SL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $3.10
100 $2.39
250 $1.79
500 $1.30
1000 $0.99
2500 $0.59
5000 $0.39

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:
设计套件:
套件 电感值 价格
M305 38 (2 of each) $60.00

规格

Electrical specifications 25°C.

Shielded

零件号 1 颜色 匝数 电感 (nH) 2 测试频率
(MHz)
Q min
at L nom 3
SRF min (MHz)
无铁芯
nom
min 4 max 5
164-03A06SL Orange 41 32 41 150 92 1100
注释
  1. To order fixed inductance parts without cores, eliminate the “A06”, e.g. 164-01L.
  2. Inductance readings taken on Agilent/HP 4286A impedance analyzer with 16092A spring clip fixture.
  3. Q measured on Agilent/HP 4286A with 16092A fixture, direct connected to Agilent/HP 4342A Q-meter and Meguro MQ-171 Q-meter with 0.5" bus bars.
  4. L min measured with core centered in winding.
  5. L max measured with core halfway out top of form.

端子:

  • Leads: RoHS compliant tin-silver over copper. Other terminations available at additional cost.
  • Shield can tabs: Tin-silver over nickel over brass
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C
Packaging tubes: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
Two per billion hours / 1/2 billion hours, calculated per Telcordia SR-332

性能曲线

Q versus Frequency (Shielded)

Q versus Frequency (Shielded)

Q versus Frequency (Shielded)

Q versus Frequency (Shielded)

Q versus Frequency (Unshielded)

Q versus Frequency (Unshielded)

Q versus Frequency (Unshielded)

Q versus Frequency (Unshielded)

物理特性

Unshielded Styles

uni5un.gif
 

Shielded Styles

uni5sh.gif

一般规格

核心材料:
Aluminum, 0.187″ (4.75 mm) long
重量:
164 series unshielded: 0.16 – 0.31 g; with shield can: 0.45 – 0.60 g; 165 series unshielded: 0.15 – 0.25 g; with shield can: 0.43 – 0.54 g
包装:
50 parts per tube

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Wave solder only. Recommended maximum board surface temperature of 168°C (334°F) for no more than three seconds. Pre-heating is recommended to minimize time over the solder nozzle.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品

相关产品系列