站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

4513TC Series

High Performance RFID Transponder Coils

符合RoHS AEC-Q flag
Our 4513TC Series of RFID transponder coils was designed for high performance with higher sensitivity and greater read distances than other coils of this size.
  • For RFID applications at 125 kHz
  • Developed for harsh mechanical environments
  • Plastic base provides exceptional durability
  • Higher sensitivity and greater read distances than other coils this size
  • AEC-Q200 Grade 1 (−40°C to +125°C)
立即购买:
计数 单价
1 $1.06
500 $0.92
1000 $0.80
2500 $0.69
5000 $0.60

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1 电感 (mH)
at 125 kHz 2
(公差: ±2%)
Q min 读取距离
(inch/cm) 3
敏感度
(mV/µT) 4
匹配
电容器 (pF) 5
DCR max (Ω) 6 SRF typ (MHz) 7
4513TC-404XGL_ 0.40 29 23.9 / 60.71 11.76 4050 9.7 5.9
4513TC-105XGL_ 1.00 33 30.95 / 78.61 19.8 1621 20.6 3.7
4513TC-245XGL_ 2.38 40 36.75 / 93.35 32.8 681 39.0 2.2
4513TC-495XGL_ 4.90 44 38.55 / 97.92 54.76 331 55.8 1.6
4513TC-725XGL_ 7.20 51 44.1 / 112.01 76.97 225 91.0 1.4
注释
  1. When ordering, please specify packaging code: 4513TC-725XGLD
  2. Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended test procedures, contact Coilcraft.
  3. Read distance measured using the KEELOQ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the voltage across the resonant circuit dropped below 10 mV.
  4. Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.”
  5. Matching capacitor value required for parallel resonant circuit operating at 125 kHz.
  6. DCR measured on micro-ohmmeter
  7. SRF measured using Agilent/HP 8753D network analyzer.

端子:

  • RoHS compliant gold over nickel over phos bronze.

包装:

  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape (2500 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
     
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
One per billion hours / one billion hours, calculated per Telcordia SR-332

性能曲线

L vs Frequency

物理特性

4513tcd.gif


dims_inches_mm-(3).gif

卷装规格

tapereel_pl-(30).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_i-(5).gif
2500 330 100 13 30,4 24,4 24 8 4 2 2,75 0,35

一般规格

核心材料:
280 – 335 mg
重量:
–40°C to +125°C
包装:
2500 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 8 mm pocket spacing, 2.75 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More info

相关产品系列