站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DS1608C-102

符合RoHS
We will continue to manufacture and support the DS1608C indefinitely, however for new designs we recommend the LPS4018, MSS7341 or MSS1038 as alternatives.

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $1.20
750 $0.90
1500 $0.69
3000 $0.55
6000 $0.45

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2 公差 (%) 3 DCR max (mΩ) 4 SRF typ (MHz) Isat (A) 5
DS1608C-102_L_ 1.0 20 40.0 250 1.4
注释
  1. When ordering, please specify termination and packaging codes: e.g. DS1608C-106MLC
  2. Inductance tested at 0.1 Vrms, 100 kHz
  3. Tolerances in bold are stocked for immediate shipment.
  4. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  5. Isat: DC current at which the inductance drops 30% (typ.) from its value without current. Details

公差:

  • M = 20%, K = 10%, J = 5% (Table above shows stock tolerances in bold.)

端子:

  • L = Gold over nickel over moly-manganese.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

包装:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (750 per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" reel, machine-ready 
    EIA-481 embossed plastic tape. Factory order only, not stocked (2500 per full reel).
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C with Isat current
储存温度范围:
e Component: –40°C to +105°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+105°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲线

Inductance vs. Frequency

Inductance vs. Current

物理特性

ds1608d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation 
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_t.gif or
part_or_d.gif
750 2500* 178/330 60/100 13 18,4 12,4 12 8 4 2 3,0 0,28
Special order
 Dot or number marking does not indicate polarity

一般规格

核心材料:
Ferrite
重量:
144– 167 mg
包装:
750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品