站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0402AF (1005) Series

Wirewound Ferrite Beads

符合RoHS
Our 0402AF Series was our first generation of 0402 wirewound ferrite beads. It has impedance values from 11 Ohms to 330 Ohms at 100 MHz and high current handling vs ceramic constructions of similar values. For much lower DCR, consider our newer 0402DF Series.
  • Higher performance than other surface mount ferrite beads in the market
  • High impedance across a wide bandwidth; up to GHz band
  • Ferrite construction and heavy gauge wire for high current handling
  • Extremely low DCR for high current applications
  • Eliminates high frequency noise in power supplies or RF signal isolation applications
立即购买:
计数 单价
1 $0.90
200 $0.65
500 $0.49
1000 $0.35
2000 $0.26
4000 $0.21
10000 $0.18

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:
设计套件:
套件 电感值 价格
C397 23 (20 of each) $55.00

规格

Electrical specifications at 25°C.

零件号 1 电感 (nH) 2 公差 (%) 3 典型阻抗 (kΩ) SRF typ (GHz) 4 DCR max (mΩ) 5 Irms (mA) 6
100 MHz 900 MHz
0402AF-200XJL_ 20 5 0.01 0.08 2.6 50.0 1600
0402AF-220XJL_ 22 5,3,2 0.01 0.09 2.5 65.0 1300
0402AF-330XJL_ 33 5 0.02 0.14 2.3 60.0 1400
0402AF-360XJL_ 36 5,3,2 0.02 0.16 2.3 75.0 1300
0402AF-390XJL_ 39 5,3,2 0.02 0.17 2.2 115 830
0402AF-510XJL_ 51 5,3,2 0.03 0.22 1.9 70.0 1100
0402AF-560XJL_ 56 5 0.03 0.24 1.9 95.0 1000
0402AF-720XJL_ 72 5 0.04 0.31 1.7 100 1000
0402AF-780XJL_ 78 5,3,2 0.04 0.34 1.6 130 970
0402AF-101XJL_ 100 5,3,2 0.06 0.51 1.4 160 900
0402AF-141XJL_ 140 5,3,2 0.08 0.62 1.2 260 630
0402AF-181XJL_ 180 5,3,2 0.10 0.82 1.2 280 560
0402AF-201XJL_ 200 5 0.12 1.09 1.0 440 400
0402AF-221XJL_ 220 5,3,2 0.13 1.04 1.2 530 380
0402AF-251XJL_ 250 5 0.14 1.21 0.90 360 520
0402AF-271XJL_ 270 5,3,2 0.16 1.31 0.86 550 360
0402AF-301XJL_ 300 5,3,2 0.17 1.53 0.86 410 420
0402AF-331XJL_ 330 5 0.19 1.83 0.82 560 350
0402AF-361XJL_ 360 5 0.21 1.90 0.81 575 360
0402AF-391XJL_ 390 5 0.22 2.33 0.76 750 300
0402AF-421XJL_ 420 5 0.25 2.25 0.70 700 340
0402AF-471XJL_ 470 5,3,2 0.28 2.66 0.65 730 310
0402AF-561XJL_ 560 5,3,2 0.33 3.59 0.60 920 200
注释
  1. When ordering, please specify termination and packaging codes: e.g. 0402AF-561XJLW
  2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP 4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces.
  3. Tolerances in bold are stocked for immediate shipment.
  4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
  5. DCR measured on Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
  6. Irms: Current that causes a 15°C temperature rise from 25°C ambient.This information is for reference only and does not represent absolute maximum ratings. Because of their open construction, these parts will not saturate.

端子:

  • L = RoHS compliant gold over nickel over silver-palladium-glass frit.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

包装:

  • W = 7" machine-ready reel
    EIA-481 punched paper tape (2000 parts per full reel).
  • Q = 7" machine-ready reel
    EIA-481 punched paper tape (5000 parts per full reel).
  • U = Less than full reel
    In tape, not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C with Irms current
储存温度范围:
Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+100°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):
One per billion hours / one billion hours, calculated per Telcordia SR-332

物理特性

0402afd.gif
 
A max2 B max C max3 D ref E F G H
0.044 0.026 0.026 0.020 0.009 0.017 0.018 0.026 inches
1,12 0,66 0,66 0,51 0,23 0,43 0,46 0,66 mm
Notes:  1. Unless otherwise indicated, all dimensions are nominal
                2. Length dimension (A) is before optional solder application. Maximum dimension
                    including solder is 0.045 in / 1.143mm.
                3. Height dimension (C) is before optional solder application. For maximum height
                    dimension including solder, add 0.006 in / 0.152 mm.

卷装规格

tapereel_pa.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) A B C D E W P Po P1 T part_or_i.gif
2000 or 5000 178 100 13 14,4 8,4 8 2 4 2 0,68

一般规格

核心材料:
Ferrite
重量:
0.9 – 1.1 mg
包装:
2000 or 5000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing.

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列