사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

7 Watt PoE Transformers

for TI LM5070

RoHS 준수
  • Developed for Texas Instruments LM5070 PoE Interface
  • IEEE 802.3af compliant for 7 W PoE applications
  • Industry standard EP10 surface mount package
  • Three different output current and voltages
  • Designed to operate in continuous mode at 250 kHz with input voltage of 36 – 72 Vdc
지금 구매:
개수 단품 가격
1 $3.13
250 $2.69
500 $2.34
1000 $1.82
2500 $1.57
5000 $1.44

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Texas Instruments LM5070와(과) 호환

부품 번호 입력 전압 출력 1 전력 FSW
Sec Bias
C1587-AL_ 36 V 72 V 3.3 V , 2.12 A 12 V , 0.02 A 7 W 250 kHz
C1588-AL_ 36 V 72 V 5 V , 1.4 A 12 V , 0.02 A 7 W 250 kHz
C1589-AL_ 36 V 72 V 12 V , 0.6 A 12 V , 0.02 A 7 W 250 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±10%)
인덕턴스
최소 @   0.65 A (µH)
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
C1587-AL_ 155.0 139.5 0.414 0.036 0.822 4.0 1 : 0.19 : 0.667 1500
C1588-AL_ 155.0 139.5 0.414 0.060 0.822 3.6 1 : 0.262 : 0.667 1500
C1589-AL_ 155.0 139.5 0.414 0.343 0.822 3.3 1 : 0.667 : 0.667 1500
메모
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 12 V, 20 mA.
  2. When ordering, please specify packaging code: e.g. C1589-ALD
  3. Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc.
  4. DCR for the secondary is per winding.
  5. Leakage inductance measured between pins 3 and 4 with all other pins shorted.
  6. Turns ratio is with the secondary windings connected in parallel.
  7. 1500 Vrms isolation from primary and bias to secondary.

종단 처리:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

패키지:

  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape.
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

lm5070_ep7s.gif
Secondary windings to be connected in parallel on PC board

물리적 특성

lm5070_ep10d.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f.gif
200 (C1588/1589-AL) 330 100 13 38,4 32,4 32 24 4 2 11,2 0,5
250 (C1587-AL) 330 100 13 38,4 32,4 32 20 4 2 11,2 0,5

일반 사양

코어 소재:
Ferrite
중량:
3.85 g
패키지:
C1587-AL : 250 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth
C1588/C1589-AL : 200 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 11.2 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.

관련 제품 시리즈