사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ETH1-230 High Power

PoE+ PoE++ Signal Path Magnetics

RoHS 준수
For higher power applications, consider the Coilcraft HPX2126L Isolation Transformer and HPF2187L Common Mode ChokeDETAILS
  • Developed to meet the IEEE 802.3at-2009 and IEEE 802.3.bt Type 3 standard for PoE+ and PoE++ applications
  • Designed for 2P cabling plants at 30 / 60 Watts. For 4P cabling plants consider the ETH1-460.
  • Exceeds the return loss requirements of Gbit Ethernet
  • 350 µH minimum at 35 mA offset current at 25°C
  • Can handle 22.5 mA minimum dc offset at 85°C.
  • Typical temperature rise: 7°C with 800 mA; 10°C with 1000 mA dc current applied to one center tap of each isolation transformer
  • Ambient temperature range: −40°C to +85°C with 1 A dc current applied

지금 구매:
개수 단품 가격
1 $7.54
200 $6.07
400 $4.44
1200 $3.85
2400 $3.31
5000 $3.03

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

부품 번호 1
(Hover for schematics)
ETH1-230L_
메모
  1. When ordering, please specify packaging code: e.g. ETH1-230LD
  2. 1500 Vrms winding to winding isolation.

종단 처리:

  • RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.

패키지:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs. Offset Current

Common Mode Rejection Ratio

Crosstalk

Differential to Common Mode Rejection

Insertion Loss

Return Loss

회로도

eth1-230schematic.gif

물리적 특성

eth1-230dimensions.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T eth1-230orientation.gif
400 330 100 13 38,4 32,4 32 20 4 2 8,5 0,5

일반 사양

코어 소재:
Ferrite
중량:
3.0 g
패키지:
400/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

관련 제품 시리즈