사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ETH1-460 PoE

Signal Path Transformer

RoHS 준수
  • Developed to meet the IEEE 802.3at-2009 and IEEE 802.3.bt Type 4 standard for PoE+ and PoE++ applications
  • Designed for 4P cabling plants at 60 / 120 Watts. For 2P cabling plants see ETH1-230.
  • Exceeds the return loss requirements of Gbit Ethernet
  • 350 µH minimum at 35 mA offset current at 25°C
  • Can handle 22.5 mA minimum dc offset at 85°C.
  • Typical temperature rise: 7°C with 800 mA; 10°C with 1000 mA dc current applied to one center tap of each isolation transformer
  • Ambient temperature range: −40°C to +85°C with 1 A dc current applied
지금 구매:
개수 단품 가격
1 $11.06
250 $9.46
500 $7.21
1000 $6.01
2500 $5.41

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

부품 번호 1
(Hover for schematics)
ETH1-460L_
메모
  1. When ordering, please specify packaging code: e.g. ETH1-460LD
  2. 1500 Vrms winding to winding isolation.

종단 처리:

  • RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.

패키지:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape. Factory order only, not stocked (250 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs. Offset Current

Return Loss

Insertion Loss

회로도

eth1-460schematic.gif

물리적 특성

eth1-460dimensions.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T eth1-460orientation.gif
250 330 100 13 38,4 32,4 32,0 24,0 4 2 10,6 0,5

일반 사양

코어 소재:
Ferrite
중량:
3.6 g
패키지:
250/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 10.6 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

관련 제품 시리즈