사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

Flyback Transformer

for Akros AS1113 PoE Controller

RoHS 준수
  • Referenced on Akros Silicon Application Note AN006
  • Designed for 13 Watt PoE applications
  • For 30 Watt applications see GA3568-DL / HA3809-AL.
지금 구매:
개수 단품 가격
1 $6.81
200 $5.46
400 $3.28
1200 $2.56

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Akros Silicon AS1113와(과) 호환

부품 번호 입력 전압 출력 1 전력 FSW
Sec Bias
HA3585-BL_ 10 V 57 V 3.3 V , 3.9 A 5 V , 0.02 A 13 W 300 kHz
HA3586-BL_ 10 V 57 V 5 V , 2.6 A 5 V , 0.02 A 13 W 300 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±10%)
인덕턴스
최소 @   2.6 A (µH)
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
Pri Sec Sync Bias Pri : Sec : Sync : Bias
HA3585-BL_ 40 36 0.140 0.014 0.255 0.220 0.740 1 : 0.29 : 0.43 : 0.43 1500
HA3586-BL_ 40 36 0.140 0.024 0.265 0.230 0.625 1 : 0.36 : 0.43 : 0.43 1500
메모
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 5 V, 20 mA.
  2. When ordering, please specify termination and packaging codes: HA3586-BLD.
  3. Inductance is for the primary, measured at 300 kHz, 0.5 Vrms.
  4. DCR for the secondary is with the windings connected in parallel.
  5. Leakage inductance is for the primary windings with the secondary windings shorted.
  6. Turns ratios are with the secondary windings connected in parallel.
  7. 1500 Vrms, one minute isolation from primary and bias to secondary.

종단 처리:

  • L = RoHS tin-silver (96.5/3.5) over tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order)
  • S = non-RoHS tin-lead (63/37). (Special order)

패키지:

  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape (200 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

ha3585s.gif

Secondary windings to be connected
in parallel on the PC board.

 

물리적 특성

ha3585d.gif

dims_inches_mm-(5).gif

테이프 및 릴 사양

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(6).gif
200 330 100 13 50,4 44,4 44 28 4 2 9,6 0,4

일반 사양

코어 소재:
Ferrite
중량:
5.3 – 5.7 g
패키지:
200 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf.

관련 제품 시리즈