사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
Inductors Explained by Coilcraft & Mouser
XGL4020 Ultra-low DCR Power Inductors

ZE263x High Isolation LLC Transformers

for Texas Instruments UCC25800-Q1

RoHS 준수 할로겐 프리 AEC-Q flag
The ZE263x series builds on the proven performance of the ZC15xx (including ZC1576-AL, ZC1580-AL, ZC1581-AL, and ZC1582-AL), which are featured in the UCC25800-Q1 ultra-low EMI transformer driver for isolated bias supplies from Texas Instruments. Designed for isolated gate driver bias supplies, the ZE263x transformer offers low interwinding capacitance to minimize EMI, and provides 5656 VDC / 4000 Vrms isolation between primary and secondary.

With 7 mm creepage and clearance, and Material Group I (CTI>600) compliance, the ZE263x is ideal for LLC resonant converters in EV onboard chargers, inverters, and other high voltage auxiliary power supplies in automotive and industrial applications.
  • Designed for use with the UCC25800-Q1 from Texas Instruments for isolated gate driver bias supply
  • LLC transformers with low interwinding capacitance
  • 5656 VDC / 4000 Vrms, one minute isolation (hipot) between primary and secondary
  • 7 mm creepage and clearance Material Group 1 (CTI > 600)
    • Insulation level may be Functional, Basic, or Reinforced depending on application variables such as working voltage, pollution degree, OVC, and altitude. Please contact Coilcraft for full details.
  • AEC-Q200 qualified

지금 구매:
개수 단품 가격
1 $3.93
100 $3.07
600 $2.89
1000 $2.71

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Texas Instruments UCC25800-Q1와(과) 호환

부품 번호 입력 전압 출력 FSW
ZE2635-BED 12 V 24 V , 0.13 A 350 kHz
ZE2636-BED 12 V 15 V , 0.2 A 350 kHz
ZE2637-BED 15 V 24 V , 0.13 A 350 kHz
ZE2638-BED 15 V 5 V , 0.6 A 350 kHz

사양

Electrical specifications at 25°C.

부품 번호
(Hover for schematics)
인덕턴스
@ 0A (µH) 1
(허용 오차: ±35%)
DCR max 누설
인덕턴스
최대 (µH) 3
권수비 정전용량
max (pF) 4
전압시간적
(V-µs) 5
절연
전압 (Vrms) 6
Irms (A) 2
Pri (Ω) Sec (mΩ) Pri : Sec
ZE2635-BED 100 0.075 153.000 2.28 1 : 2 2.43 21 4000 1.56
ZE2636-BED 100 0.075 97.000 2.42 1 : 1.3 1.78 21 4000 1.43
ZE2637-BED 100 0.075 129.000 2.36 1 : 1.7 2.27 21 4000 1.51
ZE2638-BED 100 0.075 27.000 2.6 1 : 0.4 1.61 21 4000 1.07
메모
  1. Inductance is for the primary, measured at 333 kHz, 0.1 Vrms, 0 Adc.
  2. Current that causes a 40°C rise from 25°C when applied to the primary winding with secondary current defined by the turns ratio. Please refer to the datasheet for secondary current info.
  3. Leakage Inductance is for the primary, measured at 333 kHz, 0.1 Vrms with secondary windings shorted together.
  4. Interwinding capacitance from primary to secondary. It is measured from pin 3 to 7 with pin 2 and 6 open at 333 kHz, 0.1 Vrms.
  5. Volt-time product is for the primary, between pins 2 and 3.
  6. 5656 VDC / 4000 Vrms, one minute isolation (hipot) measured between primary and secondary.
Designed per IEC 61558-1 to meet the following requirements. Please contact [email protected] for questions about suitability for use in other application conditions.
 
Reinforced insulation example Basic insulation example
Working voltage 400 Vrms Working voltage 800 Vrms
Altitude 3000 m Altitude 3000 m
Overvoltage category II Overvoltage category II
Pollution degree 2 Pollution degree 2

7 mm creepage and clearance between primary and secondary windings with Material Group I.
 

종단 처리:

  • RoHS-compliant. 260°C compatible. RoHS tin-silver over tin over nickel over phos bronze.

패키지:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+165°C (ambient + temperature rise)
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

ze263xs.gif

물리적 특성

ze263xd.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
200 330 100 13 38,4 32,4 32 20 4 2 12,3 0,5

일반 사양

코어 소재:
Ferrite
중량:
2.4 – 2.7 g
패키지:
200 per reel, 13″ reel Plastic tape: 32 mm wide, 0.50 mm thick, 20 mm pocket spacing, 12.3 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.

관련 제품 시리즈