View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

Datasheet 3Dモデル S-Param

WBC4-1WL

Name: WBC4-1WLC
Brand: Coilcraft
SKU: WBC4-1WLC
Price: 2.10 USD
Availability: InStock

WBC4-1WLC

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$2.82
375	$2.43
750	$2.10
1500	$1.83
3000	$1.58
6000	$1.45

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Packaging

C = 7" machine-ready reel

. 在庫あり、即日出荷可能.

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C393	12 (3 of each)	$47.00

仕様

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

部品番号 1 (Hover for schematics)	巻線あたりの最小L (µH) 2		テスト周波数 (kHz)	DCR max (mΩ) 3		Imp. ratio pri:sec 4	定格電流 (mA)	挿入損失 (db)	DC不均衡 5	帯域幅 (MHz)	絶縁電圧 (Vrms)	回路図	カラードット
部品番号 1 (Hover for schematics)	Pri	Sec	テスト周波数 (kHz)	Pri	Sec	Imp. ratio pri:sec 4	定格電流 (mA)	挿入損失 (db)	DC不均衡 5	帯域幅 (MHz)	絶縁電圧 (Vrms)	回路図	カラードット
WBC4-1WLC	5.0	20	100	80.0	120	1 : 4	250	0.9	10.0	0.5 — 1000	300	B	White

メモ

When ordering, please specify termination and packaging codes: e.g. WBC16-1TLC
Inductance measured at 100 kHz, 0.1 V, 0 Adc on an Agilent/ HP 4192 or equivalent.
DCR measured at 25°C on a micro-ohmmeter. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Impedance ratio is for the full primary winding to the full secondary winding.
DC imbalance is the maximum difference in current measured at pins 1 and 3 with the source at pin 2. Inductance drop is 15% at maximum imbalance.

終端処理:

L = RoHS compliant tin-silver-copper (95.5/4/0.5) over silver-platinum-glass frit.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +85°C

保管温度範囲:

Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Frequency Response

Measured on a network analyzer (re: 50 Ohms)

Imbalance Curve

Measured on a network analyzer (re: 50 Ohms)

回路図

A	B	C	D

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,9	0,3

* Special order

一般仕様

コア材料:

Ferrite

重量:

68.0 – 88.8 mg

パッケージ:

750/7″reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.9 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

WBC4-1WL

WBC4-1WLC