サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

WB2010-SM

RoHS準拠
We will continue to manufacture and support the WB series indefinitely. However, for new designs, consider the SWB, which is a drop-in replacement as an alternative to this series.

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $4.16
100 $3.53
250 $2.93
500 $2.35
1000 $1.87
2500 $1.59
5000 $1.46

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Surface mount

部品番号 1 巻線あたりの最小L (µH) 2 DCR max (Ω) Imp. ratio
pri:sec 3
定格電流 (mA) 帯域幅 (MHz) 回路図
Pri Sec Pri Sec
WB2010-SML_ 780 780 0.320 0.320 1 : 1 250 0.005 100 B
メモ
  1. When ordering surface mount parts, please specify a packaging code: e.g. WB3040-SMLD
    Through-hole parts are packaged 70 per tube and do not require a packaging code when ordering.
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc
  3. Impedance ratio is for the full primary winding to the full secondary winding.

終端処理:

  • RoHS-compliant. Matte tin over nickel over phos bronze. Other terminations available at additional cost.

パッケージ:

  • D = 13" machine ready reel.
    EIA-481 embossed plastic tape (500 parts per full reel).
  • B = Less than full reel.
    In tape, but not machine ready. To have a leader and trailer added ($25 charge),
    use code letter D instead.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +85°C
保管温度範囲:
Component: –40°C to +85°C
Packaging: –40°C to +80°C
最大部品温度:
+85°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332

性能曲線

Attenuation vs Current

Frequency Response

Frequency Response

Frequency Response

Frequency Response

回路図

WB10xx WB20xx WB30xx
wbts1.gif wbts2.gif wbts3.gif

物理的特徴

wbtd-(1).gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 (SMT parts)* 330 100 13 30,4 24,4 24 20 4 2 6,6 0,45
* Through-hole parts are packaged 70 per tube.

一般仕様

コア材料:
Ferrite
重量:
0.37 – 0.39 g
パッケージ:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.45 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

関連製品

関連製品シリーズ