サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

SWB3010-PC

RoHS準拠

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $3.85
50 $2.97
250 $2.22
500 $1.48
1000 $1.24
2500 $1.12
5000 $1.02

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Through hole

部品番号 1 巻線あたりの最小L (µH) 2 DCR max (Ω) 3 Imp. ratio
pri:sec 4
定格電流 (mA) 帯域幅 (MHz) 回路図
Pri Sec Pri Sec
SWB3010-PCL 780 780 0.320 0.320 1 : 1 250 0.005 100 C
メモ
  1. When ordering surface mount parts, please specify a packaging code: e.g. SWB3040-1-SMLD
    Through-hole parts are packaged 70 per tube and do not require a packaging code when ordering.
  2. Inductance tested at 130 kHz, 0.1 Vrms, 0 Adc
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Impedance ratio is for the full primary winding to the full secondary winding.

終端処理:

  • RoHS-compliant. Matte tin over nickel over phos bronze. Other terminations available at additional cost.

パッケージ:

  • D = 13" machine ready reel.
    EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel.
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +85°C
保管温度範囲:
Component: –40°C to +85°C
Packaging: –40°C to +80°C
最大部品温度:
+85°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332

性能曲線

Attenuation vs Current

Frequency Response

Frequency Response

Frequency Response

Frequency Response

回路図

SWB10xx SWB20xx SWB30xx
wbts1.gif wbts2.gif wbts3.gif

物理的特徴

swbd.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 (SMT parts)* 330 100 13 30,4 24,4 24 20 4 2 6,6 0,45
* Through-hole parts are packaged 70 per tube.

一般仕様

コア材料:
Ferrite
重量:
0.37 – 0.39 g
パッケージ:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.45 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

関連製品

関連製品シリーズ