サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

4513TC Series

High Performance RFID Transponder Coils

RoHS準拠 AEC-Q flag
Our 4513TC Series of RFID transponder coils was designed for high performance with higher sensitivity and greater read distances than other coils of this size.
  • For RFID applications at 125 kHz
  • Developed for harsh mechanical environments
  • Plastic base provides exceptional durability
  • Higher sensitivity and greater read distances than other coils this size
  • AEC-Q200 Grade 1 (−40°C to +125°C)

今すぐ購入:
個数 単価
1 $1.13
500 $1.05
1000 $0.92
2500 $0.79
5000 $0.69

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1 インダクタンス (mH)
at 125 kHz 2
(公差: ±2%)
Q min 読み取り距離
(inch/cm) 3
感度
(mV/µT) 4
マッチング
コンデンサ (pF) 5
DCR max (Ω) 6 SRF typ (MHz) 7
4513TC-404XGL_ 0.40 29 23.9 / 60.71 11.76 4050 9.7 5.9
4513TC-105XGL_ 1.00 33 30.95 / 78.61 19.8 1621 20.6 3.7
4513TC-245XGL_ 2.38 40 36.75 / 93.35 32.8 681 39.0 2.2
4513TC-495XGL_ 4.90 44 38.55 / 97.92 54.76 331 55.8 1.6
4513TC-725XGL_ 7.20 51 44.1 / 112.01 76.97 225 91.0 1.4
メモ
  1. When ordering, please specify packaging code: 4513TC-725XGLD
  2. Inductance and Q measured using Agilent/HP 4192A impedance analyzer at 125 kHz. For recommended test procedures, contact Coilcraft.
  3. Read distance measured using the KEELOQ® Transponder Evaluation Kit part number DM303005 from Microchip. Distance was recorded as the voltage across the resonant circuit dropped below 10 mV.
  4. Sensitivity measured in accordance with Coilcraft application note “Measuring Sensitivity of Transponder Coils.”
  5. Matching capacitor value required for parallel resonant circuit operating at 125 kHz.
  6. DCR measured on micro-ohmmeter
  7. SRF measured using Agilent/HP 8753D network analyzer.

終端処理:

  • RoHS compliant gold over nickel over phos bronze.

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +125°C
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

L vs Frequency

物理的特徴

4513tcd.gif


dims_inches_mm-(3).gif

テープ&リール仕様

tapereel_pl-(30).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_i-(5).gif
2500 330 100 13 30,4 24,4 24 8 4 2 2,75 0,35

一般仕様

重量:
280 – 335 mg
パッケージ:
2500 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 8 mm pocket spacing, 2.75 mm pocket depth
Temperature coefficient of inductance:
+50 to +210 ppm/°C

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested with pure water or alcohol only. More info

関連製品シリーズ