3D Model Datasheet SPICEモデル

1008HQ-12N

Name: 1008HQ-12NXGRC
Brand: Coilcraft
SKU: 1008HQ-12NXGRC
Price: 0.51 USD
Availability: InStock

1008HQ-12NXJLC, 1008HQ-12NXGLC, 1008HQ-12NXJRC, 1008HQ-12NXGRC

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

個数	単価
1	$0.92
200	$0.76
500	$0.59
1000	$0.43
2000	$0.30
4000	$0.25
10000	$0.21

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

R = Matte tin over nickel over silver platinum-glass frit

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

G = 2%

. 在庫あり、即日出荷可能.

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C323	15 (10 of each)	$40.00
C323-2	15 (10 of each)	$60.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (nH) 2	公差 (%) 3	Q min @ 500 MHz 4	SRF min (GHz) 5	DCR max (Ω) 6	Irms (A) 7
部品番号 1	インダクタンス (nH) 2	公差 (%) 3	Q min @ 500 MHz 4	SRF min (GHz) 5	DCR max (Ω) 6	Irms (A) 7
1008HQ-12NX_R_	12	2,5	70	2.80	0.060	1.5

メモ

When ordering, please specify tolerance, termination and packaging codes: e.g. 1008HQ-R10XGRC
Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
Tolerances in bold are stocked for immediate shipment.
Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD -D test fixture.
DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

公差:

F = 1%, G = 2%, J = 5% (Table above shows stock tolerances in bold.)

終端処理:

R = RoHS compliant, matte tin over nickel over silver platinum-glass frit.
L = RoHS compliant silver-palladium-platinum-glass frit.
T = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
S = non-RoHS tin-lead (63/37) (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

+140°C (ambient + temp rise).

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

L vs Frequency

Q vs Frequency

物理的特徴

A max	B max	C max*	D ref	E	F	G	H	I	J
0.115	0.110	0.080	0.020	0.080	0.020	0.060	0.100	0.040	0.050	inches
2,92	2,79	2,03	0,51	2,03	0,51	1,52	2,54	1,02	1,27	mm

*Low profile parts: 0.050/1,27

Note: Height dimension is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm

テープ＆リール仕様

Parts per reel			Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
Standard	2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	2,0	0,3
Low profile	2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,6	0,3

*Special order

一般仕様

コア材料:

Ceramic

重量:

32.4– 35.7 mg; 17.1– 17.7 mg (Low profile parts)

パッケージ:

2000/7″ reel; 7500/13″ reel Standard height parts: Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth. Low profile parts: Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth.

Temperature coefficient of inductance:

+25 to +125 ppm/°C

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

1008HQ-12N

1008HQ-12NXJLC, 1008HQ-12NXGLC, 1008HQ-12NXJRC, 1008HQ-12NXGRC