サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

XGL4025-332

XGL4025-332MEC

RoHS準拠 ハロゲンフリー AEC-Q flag

The XGL4025-332 by Coilcraft is an exceptional inductor that redefines performance standards in the electronic industry. With an impressive inductance of 3.3 µH, this component offers unparalleled signal integrity and precise power regulation for your high-frequency applications.  

Setting itself apart from the competition, the XGL4025-332 showcases its extraordinary capability to operate flawlessly across a wide ambient temperature range of -40°C to +125°C. From extreme cold to scorching heat, this inductor remains resilient, delivering consistent and reliable performance even in the most challenging environments.  

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $2.04
100 $1.79
250 $1.35
500 $0.81
1000 $0.63
2500 $0.55
5000 $0.50

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C506 20 (3 of each) $75.00

仕様

Electrical specifications at 25°C. Operating voltage 0 - 80 V

部品番号 1 インダクタンス (µH) 2
(公差: ±20%)
DCR (mΩ) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
XGL4025-332MEC 3.3 24.0 27.0 32 2.3 3.6 4.9 5.1 6.9
メモ
  1. When ordering, please specify termination and packaging codes: e.g. XGL4025-123MEC
  2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperature use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 4395A or equivalent
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
    Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

  • E = Halogen free component. RoHS compliant tin-silver over copper terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2000 per full reel). Factory order only, not stocked.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
−40°C to +125°C with (40°C rise) Irms
保管温度範囲:
Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
最大部品温度:
+165°C (ambient + temp rise).
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

物理的特徴

xgl4025d.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ac.gif
500 2000* 178/330 60/100 13 18,4 12,4 12 8 4 2 3,25 0,23
* Special order
 

一般仕様

コア材料:
Composite
重量:
0.23 - 0.25 g
パッケージ:
500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品

関連製品シリーズ