PFL1609 Series

Shielded Power Inductors

PFL1609 ultra-small molded power inductors offer the perfect combination of size, performance and price. PFL inductors feature soft saturation for high peak currents and magnetic shielding for high-density packaging.

Tiny, cost-effective molded power inductors
Soft saturation for peak current handling
Magnetically shielded
No thermal aging
AEC-Q200 Grade 1 (−40° to +125°C)

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$0.56
200	$0.51
500	$0.42
1000	$0.35
2000	$0.30
4000	$0.27

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

E = Matte tin over nickel

Packaging

W = 7" machine-ready reel

Tolerance

M = 20%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C433	14 (20 of each)	$45.00

仕様

Electrical specifications at 25°C.

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (mA) 5			Irms (mA) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
PFL1609-47NME_	0.047	30	50	1850	2200	2600	2800	2400	3400
PFL1609-471ME_	0.47	83	100	650	760	990	1200	1000	1300
PFL1609-561ME_	0.56	110	130	600	710	920	1100	1100	1400
PFL1609-681ME_	0.68	145	170	520	610	780	900	1100	1400
PFL1609-102ME_	1.0	200	230	445	480	690	760	650	850
PFL1609-222ME_	2.2	410	470	130	300	390	470	480	630
PFL1609-472ME_	4.7	620	700	60.0	240	300	370	380	500
PFL1609-682ME_	6.8	1000	1200	40.0	170	230	260	330	440
PFL1609-103ME_	10	1200	1400	35.0	130	185	215	320	420

メモ

When ordering, please specify termination and packaging codes: e.g. PFL1609-103MEW
Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture with an Agilent/HP 4286A impedance analyzer and Coilcraft provided correlation pieces.
DCR measured at 25°Cusing a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

E = Halogen free component. RoHS-compliant matte tin over nickel over silver-platinum-glass frit terminations.
Q = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

W = 7″ machine-ready reel. EIA-481 punched paper tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). (2000 parts per full reel).
U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

−40°C to +125°C

保管温度範囲:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

最大部品温度:

+140°C (Ambient + temperature rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Inductance vs Current

Inductance vs. Frequency

物理的特徴

テープ＆リール仕様

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)					Orientation
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	T
2000	178	100	13	14,4	8,4	8	4	4	2	1,0

一般仕様

コア材料:

Composite

重量:

4.3 – 8.3 mg

パッケージ:

2000 per 7″ reel Paper tape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PFL1609 Series

Shielded Power Inductors