サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1048 Series

Shielded Coupled Power Inductors

RoHS準拠 ハロゲンフリー

Coilcraft's MSD1048 Series of 1:1 coupled power inductors feature magnetic shielding for compact packaging and tight winding-to-winding coupling. They are ideal for Flyback, SEPIC, Ćuk, Zeta and other applications.

  • Ideal for Flyback, SEPIC, Ćuk, Zeta and other applications
  • Magnetic shielding allows high-density mounting
  • Tight winding coupling
  • Industry standard footprint
See Selecting inductors for SEPIC
今すぐ購入:
個数 単価
1 $1.35
200 $1.07
400 $0.93
1000 $0.72
2400 $0.62
5000 $0.57

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

フライバック用途

部品番号 1 インダクタンス (µH) 2 公差 (%) DCR max (Ω) 3 絶縁
電圧 (V)
漏れ
インダクタンス (µH) 5
巻数比
MSD1048-222NE_ 2.2 30 0.019 200 0.30 1 : 1
MSD1048-103ME_ 10 20 0.053 200 0.40 1 : 1
MSD1048-223ME_ 22 20 0.098 200 0.45 1 : 1
MSD1048-473ME_ 47 20 0.21 200 0.50 1 : 1
MSD1048-683ME_ 68 20 0.30 200 0.55 1 : 1
MSD1048-104ME_ 100 20 0.39 200 0.80 1 : 1
MSD1048-224KE_ 220 10 0.84 200 1.0 1 : 1

SEPIC用途

部品番号 1 インダクタンス (µH) 2 公差 (%) DCR max (Ω) 3 SRF typ (MHz) 4 結合係数 漏れ
インダクタンス (µH) 5
Isat (A) 6 Irms (A)
両方の巻線 7 単一巻線 8
MSD1048-222NE_ 2.2 30 0.019 65.0 0.97 0.30 9.1 2.4 3.4
MSD1048-103ME_ 10 20 0.053 27.0 >0.99 0.40 4.3 1.5 2.1
MSD1048-223ME_ 22 20 0.098 17.0 >0.99 0.45 2.9 1.3 1.9
MSD1048-473ME_ 47 20 0.21 12.0 >0.99 0.50 2.0 1.1 1.6
MSD1048-683ME_ 68 20 0.30 9.0 >0.99 0.55 1.7 1.0 1.4
MSD1048-104ME_ 100 20 0.39 7.3 >0.99 0.80 1.3 0.85 1.2
MSD1048-224KE_ 220 10 0.84 4.8 >0.99 1.0 0.90 0.62 0.87
メモ
  1. When ordering, please specify termination and packaging codes: e.g. MSD1048-224KED
  2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
  3. DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
  4. SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
  5. Leakage Inductance is for L1 and is measured with L2 shorted.
  6. DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. It is the sum of the current flowing in both windings.
  7. Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.
  8. Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.

終端処理:

  • E = RoHS compliant matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • D = 13" reel, machine-ready 
    EIA-481 embossed plastic tape (800 parts per full reel).
  • B = Less than full reel
    In tape, not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +85°C with (40°C rise) Irms current.
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+125°C (ambient + temp rise).
時間内の障害(FIT)/平均障害間隔(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲線

Inductance vs Current

Inductance vs. Frequency

回路図

msd1048schem.gif

物理的特徴

msd1048d-(1).gif
 

 

テープ&リール仕様

tapereel_pl-(22).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_o-(1).gif
800 178/330 60/100 13 18,4 12,4 24 16 4 2 5,1 0,35

一般仕様

コア材料:
Ferrite
重量:
1.5– 1.8 g
パッケージ:
800/13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth
Winding to Winding Isolation:
200 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

関連製品ファミリー