View:
はじめに
仕様
環境
性能曲線
回路図
物理的特徴
テープ＆リール
はんだ付け/洗浄

0805USBN Series

Low-profile Common Mode Chokes

Our 0805USBN Series low-profile common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also suitable for USB-type C specification 1.0 and provide up to
6.5 GHz differential mode 3 dB cutoff frequency and up to 30 dB common mode noise attenuation in the GHz range.

For noise suppression in super-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). Also suitable for USB-type C specification 1.0.
Up to 6.5 GHz differential mode 3 dB cutoff frequency
Up to 35 dB common mode noise attenuation in GHz range
Compact, low-profile (<1.0 mm) package
Designed for high temperature applications up to +125°C

Refer to Designing Common Mode Filters for design guidance.

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$0.82
200	$0.68
500	$0.47
1000	$0.38
2000	$0.31
4000	$0.29

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C470	39 (10 of each)	$110.00

仕様

Electrical specifications at 25°C.

部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (GHz) 2	コモンモード減衰タイプ (dB)			最小インダクタンス (nH) 3	Irms (mA) 4	DCR max (Ω) 5	絶縁電圧 (Vrms) 6
部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	遮断周波数 (GHz) 2	10 MHz	100 MHz	500 MHz	最小インダクタンス (nH) 3	Irms (mA) 4	DCR max (Ω) 5	絶縁電圧 (Vrms) 6
0805USBN-121MR_	2	0.14 @ 2.6 GHz	6.4	0.04	0.50	5.00	14	500	0.110	250
0805USBN-271MR_	2	0.30 @ 2.5 GHz	5.1	0.09	1.40	10.00	30	500	0.140	250
0805USBN-481MR_	2	0.60 @ 3.0 GHz	3.4	0.13	3.50	14.70	53	500	0.220	250
0805USBN-701MR_	2	0.79 @ 2.0 GHz	3.4	0.18	5.30	17.40	77	500	0.235	250
0805USBN-941MR_	2	1.28 @ 1.4 GHz	3.5	0.30	7.60	21.10	105	500	0.270	250
0805USBN-132MR_	2	1.61 @ 1.2 GHz	2.3	0.50	10.00	24.40	140	500	0.320	250
0805USBN-162MR_	2	2.00 @ 1.0 GHz	1.5	0.78	12.10	27.30	182	450	0.370	250
0805USBN-222MR_	2	2.47 @ 0.96 GHz	1.7	1.14	14.00	30.00	252	350	0.630	250

メモ

When ordering, please specify packaging code: e.g. 0805USBN-222MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

終端処理:

Matte tin over nickel over silver-palladium-glass frit.

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

最大部品温度:

140°C

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

回路図

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,07	0,23

*Special order

一般仕様

コア材料:

Ferrite

重量:

9.0 – 13.0 mg

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0805USBN Series

Low-profile Common Mode Chokes