サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0805USBN Series

Low-profile Common Mode Chokes

RoHS準拠 ハロゲンフリー

Our 0805USBN Series low-profile common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also suitable for USB-type C specification 1.0 and provide up to 
6.5 GHz differential mode 3 dB cutoff frequency and up to 30 dB common mode noise attenuation in the GHz range.

  • For noise suppression in super-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). Also suitable for USB-type C specification 1.0.
  • Up to 6.5 GHz differential mode 3 dB cutoff frequency
  • Up to 35 dB common mode noise attenuation in GHz range
  • Compact, low-profile (<1.0 mm) package
  • Designed for high temperature applications up to +125°C
Refer to Designing Common Mode Filters for design guidance.
今すぐ購入:
個数 単価
1 $0.77
200 $0.64
500 $0.44
1000 $0.35
2000 $0.29
4000 $0.27

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C470 39 (10 of each) $110.00

仕様

Electrical specifications at 25°C.

部品番号 1 ライン コモンモード
ピークインピーダンス (kΩ)
遮断
周波数 (GHz) 2
コモンモード
減衰タイプ (dB)
最小
インダクタンス (nH) 3
Irms (mA) 4 DCR max (Ω) 5 絶縁
電圧 (Vrms) 6
10 MHz 100 MHz 500 MHz
0805USBN-121MR_ 2 0.14 @ 2.6 GHz 6.4 0.04 0.50 5.00 14 500 0.110 250
0805USBN-271MR_ 2 0.30 @ 2.5 GHz 5.1 0.09 1.40 10.00 30 500 0.140 250
0805USBN-481MR_ 2 0.60 @ 3.0 GHz 3.4 0.13 3.50 14.70 53 500 0.220 250
0805USBN-701MR_ 2 0.79 @ 2.0 GHz 3.4 0.18 5.30 17.40 77 500 0.235 250
0805USBN-941MR_ 2 1.28 @ 1.4 GHz 3.5 0.30 7.60 21.10 105 500 0.270 250
0805USBN-132MR_ 2 1.61 @ 1.2 GHz 2.3 0.50 10.00 24.40 140 500 0.320 250
0805USBN-162MR_ 2 2.00 @ 1.0 GHz 1.5 0.78 12.10 27.30 182 450 0.370 250
0805USBN-222MR_ 2 2.47 @ 0.96 GHz 1.7 1.14 14.00 30.00 252 350 0.630 250
メモ
  1. When ordering, please specify packaging code: e.g. 0805USBN-222MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
  4. Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. 250 Vrms, 1 minute interwinding isolation (hipot).

終端処理:

  • Matte tin over nickel over silver-palladium-glass frit.

パッケージ:

  • C= 7″ machine-ready reel
    EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B= Less than full reel
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D= 13″ machine-ready reel
    EIA-481 embossed plastic tape (7500 parts per full reel).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +125°C with Irms current
保管温度範囲:
Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
140°C
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

回路図

schematic.png

物理的特徴

0805usbnd.gif
dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif



 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T
part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 1,07 0,23
*Special order

一般仕様

コア材料:
Ferrite
重量:
9.0 – 13.0 mg

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ